Panasonic SC-BTX70 manual TV/Device Connection

“TV/Device Connection”

TV Aspect		When connected to a 16:9 widescreen television:
Set to match the type of television connected.		≥16:9:	Video recorded for 4:3 aspect screen is displayed as a
			4:3 ratio image in the centre of the screen.
		When connected to a 4:3 aspect television:
		≥4:3:	Video recorded for a widescreen is played as Pan &
			Scan (unless prohibited by the producer of the disc).
			When playing BD-Video, video is output as “4:3
		≥4:3 Letterbox:	Letterbox”.
			Video recorded for a widescreen is played in the
			letterbox style.
Time Delay*1		≥Auto ≥0ms ≥20ms≥40ms≥60ms≥80ms≥100ms ≥120ms ≥140ms
When connected with a Plasma display, adjust if you		When using VIERA Link “HDAVI Control” with “HDAVI Control 3” (or later)
notice the audio is out of sync with the video.		compatible TV (> 26), select “Auto”. Audio and video will automatically
		be set in sync.
		–This works only when “BD/DVD”, “SD”, “USB”, “AUX”, “D-IN 1” (DIGITAL
		IN 1) or “D-IN 2” (DIGITAL IN 2) is selected as the source. (> 27)
HDMI Connection
≥Press [OK] to show the following settings.
	HDMI Video Format*2	≥Automatic:	Automatically selects the output resolution best suited
	The items supported by the connected devices are		to the connected television (1080p, 1080i, 720p or
	indicated on the screen as “¢”. When any item	≥576p/480p	576p/480p).
	without “¢” is selected, the images may be		≥720p
		≥1080i	≥1080p
	distorted.
		–When outputting 1080p signal, we recommend using High Speed HDMI
		Cables that have the HDMI logo (as shown on the cover) and are less
		than 5.0 meters to prevent video distortion etc.
		–To enjoy high definition video up-converted to 1080p, you need to
		connect the unit directly to 1080p compatible HDTV (High Definition
		Television). If this unit is connected to an HDTV through other
		equipment, it must also be 1080p compatible.
	24p Output [BD-V] [DVD-V]	≥On:	Images in 24p are output in 24p as they are.
	When this unit is connected to a TV supporting		However,
	1080/24p output via an HDMI cable, this unit		–when video is being output at 24 frames, images from
	displays each frame at 1/24 second intervals – the		any other terminal than the HDMI AV OUT terminal may
			not be output properly.
	same interval originally shot with the film camera.
			–[BD-V]:when images other than 24p are played,
	≥When playing DVD-Video, set to “On” and then
			images are output at 60p.
	set “24p” in “Picture” (> 34) to “On”.	≥Off
	HDMI Output Range	≥Standard:	The video is output as it is.
	Effective when connected to a device that only	≥Enhanced:	When the black and white contrast of a video is low, the
	supports RGB output.		signal is enhanced to reproduce clear video.
	HDMI Audio Output	≥On:	To output audio through the TV’s speakers or other
	This setting selects whether or not to output audio	≥Off:	devices.
	from HDMI.		To output audio through system speakers. (The audio is
			output using the settings of the main unit.)
	VIERA Link	≥On:
	Set to use “HDAVI Control” function when	≥Off:	Select when you do not want to use “HDAVI Control”.
	connected with an HDMI cable to a device that
	supports “HDAVI Control”.
	Power Off Link	≥Video/Audio:	When the TV is turned off, this unit will turn off
	Select the desired power off link setting of this unit		automatically.
	for VIERA Link operation (> 27). (This works	≥Video:	When the TV is turned off, this unit will turn off except
	depending on the settings of the connected VIERA		during the following conditions:
			–audio playback ([CD] [MP3])
	Link “HDAVI Control” compatible equipment.)
			–iPod mode
			–radio mode
			–“AUX” or “D-IN1” (DIGITAL IN 1) mode (non-selected
			TV audio setting for VIERA Link)
			–“D-IN2” (DIGITAL IN 2) mode (non-selected TV audio
			setting for CABLE/SAT)
TV System		≥NTSC:	Select when connecting to a NTSC television.
Change the setting to match the equipment you are		≥PAL:	Select when connecting to a PAL or multi-system
connecting with.			television.

≥If picture output is not smooth, change the setting. ≥When NTSC contents are played, they are

outputted in the signal format specified in the “NTSC Contents Output”, irrespective of the settings here.

*1 This function has no effect when S.SURROUND is selected during AUX (TV) playback.

*2 In this unit, a P4HD (> 53) video processor is used to provide video of optimal resolution to the connected TV.

Advanced operations

RQT9464

37