Sony XR-C450W manual Displaying the station name, Erasing the station name

3 Enter the characters.

1Press (+) to select the desired

characters.

(A nB nC n··· Z n0 n1 n2 n

··· 9 n+ n– n* n/ n\ n> n< n. n_ )

FM1 ￿W

If you press (Ð), the characters appear in the reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press (SEL) after locating the desired character.

The flashing cursor moves to the next space.

FM1 ￿W

If you press (SEL) when the eighth character (farthest right character) is flashing, the flashing part goes back to the first character (farthest left character).

3Repeat steps 1 and 2 to enter the entire name.

4 To return to the normal radio reception, press (FILE) for two seconds.

Tip

To erase/correct a name, enter “_” (under-bar) for each character.

Displaying the station name

Press (DSPL) during radio reception.

FM1 ￿￿

Each time you press (DSPL), the item changes as follows:

zStation name* z Frequency z Clock

*If the station name is not stored, “NO NAME” appears in the display for one second.

Erasing the station name

1 Tune in any station and press (FILE) for two seconds.

2 Press (5) while pressing (SEL).

3 Press (+) or (Ð) to select the name that you want to erase.

4 Press (SEL) for two seconds. The name is erased.

Repeat steps 3 and 4 if you want to erase other names.

5 Press (FILE) for two seconds.

The unit returns to the normal radio reception mode.

EN

Radio

9