Sony XR-C450W manual Selecting the specific tracks for playback, Displaying the disc memo

Note

If you try to label an MD and you have not connected a CD changer with the custom file function “*FULL*” then “--------” appear in the display, but you cannot input

characters. In this case, press (FILE) for two seconds.

Displaying the disc memo

Press (DSPL) during CD playback.

CD ￿￿

Each time you press (DSPL) during CD playback, the item changes as follows:

z Elapsed playback time			z Disc name
		Z
	Clock

Erasing the disc memo

1 Press (SOURCE) to select the CD changer.

2 Play the CD and press (FILE) for two seconds.

3 Press (5) while pressing (SEL).

4 Press (+) or (Ð) to select the name that you want to erase.

5 Press (SEL) for two seconds. The name is erased.

Repeat steps 4 and 5 if you want to erase other names.

6 Press (FILE) for two seconds.

The unit returns to the normal CD playback mode.

Selecting the specific tracks for playback

— Bank

(CD changer with custom file function)

If you label the disc, you can set the unit to skip tracks and play only the tracks you want.

1 Start playing the disc and press (FILE) for two seconds. Then press (FILE) momentarily.

Bank edit mode

CD2 DISC TRACK

￿5 1

Note

If you have not labeled the disc, you cannot use this function. For more information on “Labelling a CD”, refer to page 12.

2 Press either side of (SEEK/AMS) to select the track number you want to skip and press (SEL).

CD2 DISC TRACK

￿5 3

The indication changes from “PLAY” to “SKIP.” If you want to return to “PLAY," press (SEL) again.

3 Repeat step 2 to set the “PLAY” to “SKIP” mode on all the tracks.

4 Press (FILE) for two seconds.

The unit returns to the normal CD playback mode.

Notes					EN
• You can set the “SKIP” mode on up to 24 tracks.				CD/MD
• You cannot set the “SKIP” mode on all the tracks.
Playing the specific tracks only				Changer
You can select:
•BANK-ON to play the tracks with “PLAY”
setting.
•BANK-INV (inverse) to play the tracks with
the “SKIP” setting.
1 During playback, press (4).
	“BANK” appears on the display.
2 Press (4) to select the desired mode.
	Each time you press (4), the display
	changes as follows:
	z BANK-ON	z BANK-INV	zBANK-OFF

CD1 ￿ BANK ON BANK

Playback starts from the track following the current one.

To go back to the normal playing mode, select “BANK-OFF” in step 2.

13