B
| OUTPUT |
|
R AUDIO L | VIDEO |
|
| ||
| OUT | Recorder |
|
| |
Connecting a composite-video television
1.Connect the yellow video cable from one of the yellow VIDEO terminals in the LINE OUT cluster on the Hard Disk Recorder to the yellow VIDEO IN terminal on your television.
2.Connect one end of the red and white audio cables to the AUDIO terminals in the LINE OUT cluster on the Hard Disk Recorder that are in line with the yellow video terminal you used. For example, if you used LINE 1 for video, use LINE 1 for audio.
Audio Cables
Video Cable
NOTES
| AUDIO |
| VIDEO |
R | IN | L | IN |
Television
•If your TV has only one AUDIO IN jack, use the white plug and leave the red plug unattached on both the Hard Disk Recorder and your television. You may purchase an adapter that combines the two audio cables and then connect it to the TV’s available AUDIO jack.
•If your television has an
•If your TV has a VHF/UHF jack only, you need to purchase an RF modulator. You will only get mono audio this way. However, you can avoid using an RF modulator by connecting the Hard Disk Recorder to a VCR. See “Connecting the Hard Disk Recorder to a TV That Has a VHF/UHF Jack Only” on page 11.
•Refer to your TV’s operating instructions for more information on connecting devices to your TV.
C Connecting the telephone line
You need to connect the Hard Disk Recorder to a telephone jack to communicate with the ReplayTV Service. The telephone connection is used nightly by the Hard Disk Recorder to receive updates to the Channel Guide and other Hard Disk Recorder enhancements. The phone connection is also used to update the Hard Disk Recorder with new features, as they become available.
The Hard Disk Recorder may not be used on coin services provided by the telephone company, and you may not be able to use the Hard Disk Recorder if you are on a party line or if you use a pulse telephone. Contact your local telephone company with regard to these matters. If you have an older,
Connect the supplied telephone cord from the telephone wall jack in your home to the TEL LINE jack on the Hard Disk Recorder. If the wall jack is being used, plug the supplied telephone splitter into the wall jack. Then plug both phone lines into the splitter.
Interrupted phone signal
On some phone lines, such as those with voice mail, the normal continuous dial tone can be interrupted. The Hard Disk Recorder can use a line only when the tone is uninterrupted. If you can’t clear the tone (for example, by clearing new voice mail messages), you need a different line for the Hard Disk Recorder.
Using the telephone while the Hard Disk Recorder is calling the ReplayTV Service
If you need to use the phone while the Hard Disk Recorder is using the phone line, you’ll need to stop the Hard Disk Recorder phone call and wait for the dial tone to return. To stop the phone call and return the dial tone:
1.Pick up the handset and wait 5 seconds.
2.Put back the handset and wait 5 seconds.
3.Repeat steps 1 and 2.
4.Pick up the handset and wait 5 more seconds.
5.At this point, you should hear the dial tone. Enter a phone number within 8 seconds; otherwise, the Hard Disk Recorder will automatically reconnect to the service.
D Connecting the AC Power cord
Connect the supplied AC power cord to the
E Complete the on-screen setup
See “Initial Setup” on pages 18~21.
9
PanaHDR | 9 | 00/12/01, 16:37 |