Panasonic DMR-ES20 Recording from a video cassette recorder, Manual recording, REC REC Mode

Page 30
If the DV automatic recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on.
If that does not work, follow the instructions for manual recording (➔ left).
-R-RW(V) +R
5 Press [w, q] to select “Rec” and press [ENTER].
Recording starts.
When recording finishes
The confirmation screen appears. Press [ENTER] to finish DV automatic recording.
To stop recording Press [g].
Note
• Only one piece of DV equipment (e.g., digital video camcorder) can be connected to the unit via the DV input terminal.
• It is not possible to operate the unit from the connected DV equipment.
• The DV input on this unit is for use with DV equipment only. (It cannot be connected to a computer, etc.)
• The DV equipment name may not be shown correctly.
• Depending on the DV equipment, the images or audio may not be input properly.
• The date and time information on the tape of the DV equipment will not be recorded.
• You cannot record and play simultaneously.
Press [e, r] to select “DV AUTO REC” and press [ENTER].
4
Press [REC MODE] to select the recording mode.
2 Press [FUNCTIONS].
3 Press [e, r] to select “To Others” and press [ENTER].
While stopped
1
To record programmes to fill up the remaining space on the disc ➔ page 16, Flexible Recording
Almost all videos and DVD software on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit.
DV automatic recording (DV AUTO REC)
RAM
When the “DV AUTO REC” function is used, programmes are recorded as a title while at the same time chapters are created at each break in the images and the playlist is created automatically.
Preparation
1 Turn off the main unit and DV equipment, then connect the equipment with the unit’s DV input terminal (➔ left).
2 Turn on the main unit and DV equipment.
3 Pause play of the DV equipment at the point you want recording to start.
• When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu (➔ page 38).
Press [h] to pause recording. (Press again to restart recording.)
Recording starts.
Press [* REC].
Start play on the other equipment.
Press [REC MODE] to select the recording mode.
e.g., If you have connected to AV3 input terminals, select “AV3”.
Press [INPUT SELECT] to select the input channel for the equipment you have connected.
While stopped

ENGLISH

Recording from a video cassette recorder

 

 

 

ShowView

 

1

CANCEL

INPUT SELECT MANUAL SKIP

 

 

 

 

 

INPUT

 

SKIP

SLOW/SEARCH

SELECT

 

g

 

 

 

h

2

DIRECT NAVIGATOR

 

FUNCTIONS

 

 

 

 

 

FUNCTIONS

 

 

 

 

 

TOP MENU

 

 

 

 

3

 

 

 

 

e, r, w, q

 

 

 

 

ENTER

4

SUB MENU

 

 

RETURN

 

PROG/CHECK DISPLAY

STATUS

TIME SLIP

 

To skip unwanted parts

REC

REC MODE EXT LINK

TIMER

 

To stop recording

* REC

 

 

 

REC MODE

CREATE

 

 

Press [g].

AUDIO

ERASE

F Rec

 

CHAPTER

 

Transfer (Dubbing)

e.g.,Connecting other video equipment to the AV3 or DV input terminals

•Turn off the unit and other video equipment before connecting.

OPEN/CLOSE

REC

EXT LINK CH

This unit

Yellow White Red

 

 

 

 

 

 

 

 

Audio/Video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DV cable

 

S Video

 

 

 

 

 

 

 

(IEEE 1394,

 

cable

 

 

 

cable

4-pin)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other video equipment

If the audio output of the other equipment is monaural, connect to L/MONO.

The S VIDEO terminal achieves a more vivid picture than the VIDEO terminal.

When recording from the unit’s DV terminal

Select the type of audio recording from “Audio Mode for DV Input” in the SETUP menu (➔ page 35).

When recording from DV equipment (e.g., digital video camcorder), you can record audio/video recordings from DV tape only.

Manual recording

RQT8212

30

RAM -R -RW(V) +R

Preparation

•Connect a video cassette recorder, etc. to this unit’s input terminals.

•When recording bilingual programmes

RAM When both M 1 and M 2 is selected on the connected equipment, you can select the audio type in playback.

Select either M 1 or M 2 on the connected equipment. (The selected audio only is recorded.)

•When the output signal from the external equipment is NTSC,

change the “TV System” to “NTSC” in the SETUP menu (➔ page 38).

•To reduce noise in input from external equipment (e.g., video casette recorder), set “AV-in NR” to “On” (➔ page 25).

•Check the time on the unit is correct.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating Instructions ExampleStarted Inside of product Tuotteen sisällä Produktets innsideTable of contents AccessoriesRemote control Play-only discs 12 cm/8 cm Disc informationDiscs you can use for recording and play 12 cm/8 cm DVD-RAMDiscs that cannot be played Disc handlingTypes of disc for the type of connected TV Main unit Remote controlControl reference guide Unit’s displayGetting Connecting a television with 21-pin Scart terminal and VCRWhen the unit is not to be used for a long time Link functionsConnecting a television with AUDIO/VIDEO terminals and VCR ConnectionComponent video output To enjoy multi-channel surround sound on DVD-Video Connecting a digital/satellite receiver or decoderConnecting an amplifier or system component Connection to a stereo amplifierEnter Tuning Preset Download Setup with Q Link functionsIf the clock setting menu appears ReturnAuto-Setup starts. This takes about 8 minutes Auto-Setup Setup without Q Link functionsCountry setting menu appears Auto-Setup is complete when you see the television pictureTo enjoy progressive video Press e, r to select Setup and press EnterSelecting television type and aspect FunctionsWhen the following indicator appears on the unit’s display Television operationWhile pressing TV, enter the code with the numbered buttons Recording television programmes Recording television programmesRecording modes and approximate recording times Press 1 2 CH to select the channelDirect TV Recording Playing while you are recordingPress e, r, w, q to select Start and press Enter Flexible RecordingPress F Rec Recording from digital/satellite receiver or decoderPress z Timer Timer recordingUsing Showview system to make timer recordings Press ShowViewCheck, change or delete a programme To put the unit on timer recording standby Making timer recordings on the televisionTo exit the timer recording list To change a programmeChanging audio during play Playing discsPress q Play Press AudioTime Time Slip Operations during playSkipping the specified Manual SkipPress TOP Menu Using menus to play MP3 and still pictures JPEG/TIFFPlaying MP3 Press e, r to select the track and press EnterPress e, r to select Jpeg and press Enter Press Enter Press FunctionsPress e, r to select Menu and press Enter Press e, r, w, q to select FolderDisc menu-Setting the disc content Using on-screen menusCommon procedures Press DisplayFunctions window Status messages Press Direct Navigator Editing titles/chaptersEditing titles/chapters and playing chapters Press e, r, w, q to select the title Erase Chapter Title operations Chapter operations Create ChapterPress e, r to select Playlists and press Enter Creating, editing and playing playlistsCreating playlists Press ReturnTo show other pages/Multiple editing Editing and playing playlists/chaptersPlaylist operations Press w, q to select Erase and pressREC REC Mode Recording from a video cassette recorderManual recording Setting the protection Providing a disc with a nameErasing all titles-Erase all titles Erasing all the contents of a disc -Format Disc Show Enter Name screen Changing the unit’s settingsEntering text Press e, r, w, q to select a character and press EnterSummary of settings Changing the unit’s settingsConvenient functions DTS MpegQuick Start On Clock Auto Clock Setting Manual Clock Setting Power SaveDefault Settings Shipping ConditionTuning Press e, r to select Manual and press EnterManual TV System Clock settings Child LockReference SpecificationsGlossary NorskGlossary Set up Frequently asked questionsOptional Accessories RecordingOn the television Error messagesMaintenance On the unit’s displayTroubleshooting guide Even when g is pressed Remote control doesn’tPresets Startup is slow OperationService Safety precautionsPlacement Foreign matter VoltageMemo Index RGB
Top Page Image Contents