Panasonic DMR-ES20 Connecting a television with 21-pin Scart terminal and VCR, Getting

Page 7

STEP 1 Connection

•The equipment connections described are examples.

•Before connection, turn off all equipment and read the appropriate operating instructions.

•Peripheral equipment and optional cables are sold separately unless otherwise indicated.

Connecting a television with 21-pin Scart terminal and VCR

When there is no 21-pin Scart terminal on the television (➔ page 8)

 

 

indicates included accessories.

 

 

indicates accessories not included.

1

4

are required connections. Connect in the numbered order.

To the aerial

Television’s rear panel

ENGLISH

started

Splitter

VHF/UHF

RF IN

Aerial cable

1 2

This unit’s rear panel

AV IN

RF coaxial cable

3

Fully wired 21-pin Scart cable

To household mains socket

(AC 220 to 240 V, 50 Hz)

AC mains lead

 

Connect only after all other

 

connections are complete.

4

 

Getting

21-pin Scart cable

Use a splitter if you also want to connect the aerial to your VCR.

AV OUT

VHF/UHF

RF IN

AV1 terminal

If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output on this unit (➔ below).

To output in RGB select “RGB ( without component )” from “AV1 Output” in the SETUP menu (➔ page 35) after tuning is completed (➔ page 10, 11).

VCR’s rear panel

■RGB

This refers to the three primary colours of light, red (R), green (G), and blue (B) and also the method of producing video that uses them. By dividing the video signal into the three colours for transmission, noise is reduced for even higher quality images.

■Q Link functions

Q Link offers a range of convenient functions (For further details ➔ page 41). Make sure to connect a fully wired 21-pin Scart cable to the television if using the Q Link function.

The following systems from other manufacturers have similar function to Q Link from Panasonic. For details, refer to your television’s operating instructions or consult your dealer.

• Q Link (registered trademark of Panasonic)

• Megalogic (registered trademark of Grundig)

• DATA LOGIC (registered trademark of Metz)

• SMARTLINK (registered trademark of Sony)

• Easy Link (registered trademark of Philips)

 

■Do not connect the unit through a video cassette recorder

Video signals fed through video cassette recorders will be affected by copyright protection systems and the picture will not be shown correctly on the television.

•When connecting to a television with a built in VCR, connect to the input terminals on the television side, not the VCR side.

Television

This unit

VCR

Television

VCR

This unit

■ When the unit is not to be used for a long time

Before moving the unit, ensure the disc tray is

To save power, unplug it from the household mains socket. This unit

empty.

consumes a small amount of power, even when it is turned off

Failure to do so will risk severely damaging the disc and

[approx. 3 W (Power Save mode)].

the unit.

 

RQT8212

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Example Operating InstructionsInside of product Tuotteen sisällä Produktets innside StartedAccessories Table of contentsRemote control DVD-RAM Disc informationDiscs you can use for recording and play 12 cm/8 cm Play-only discs 12 cm/8 cmDisc handling Discs that cannot be playedTypes of disc for the type of connected TV Unit’s display Remote controlControl reference guide Main unitLink functions Connecting a television with 21-pin Scart terminal and VCRWhen the unit is not to be used for a long time GettingConnection Connecting a television with AUDIO/VIDEO terminals and VCRComponent video output Connection to a stereo amplifier Connecting a digital/satellite receiver or decoderConnecting an amplifier or system component To enjoy multi-channel surround sound on DVD-VideoReturn Tuning Preset Download Setup with Q Link functionsIf the clock setting menu appears EnterAuto-Setup is complete when you see the television picture Auto-Setup Setup without Q Link functionsCountry setting menu appears Auto-Setup starts. This takes about 8 minutesFunctions Press e, r to select Setup and press EnterSelecting television type and aspect To enjoy progressive videoTelevision operation When the following indicator appears on the unit’s displayWhile pressing TV, enter the code with the numbered buttons Press 1 2 CH to select the channel Recording television programmesRecording modes and approximate recording times Recording television programmesPlaying while you are recording Direct TV RecordingRecording from digital/satellite receiver or decoder Flexible RecordingPress F Rec Press e, r, w, q to select Start and press EnterPress ShowView Timer recordingUsing Showview system to make timer recordings Press z TimerCheck, change or delete a programme To change a programme Making timer recordings on the televisionTo exit the timer recording list To put the unit on timer recording standbyPress Audio Playing discsPress q Play Changing audio during playManual Skip Operations during playSkipping the specified Time Time SlipPress e, r to select the track and press Enter Using menus to play MP3 and still pictures JPEG/TIFFPlaying MP3 Press TOP MenuPress e, r, w, q to select Folder Press Enter Press FunctionsPress e, r to select Menu and press Enter Press e, r to select Jpeg and press EnterPress Display Using on-screen menusCommon procedures Disc menu-Setting the disc contentFunctions window Status messages Press e, r, w, q to select the title Editing titles/chaptersEditing titles/chapters and playing chapters Press Direct NavigatorCreate Chapter Title operationsChapter operations Erase ChapterPress Return Creating, editing and playing playlistsCreating playlists Press e, r to select Playlists and press EnterPress w, q to select Erase and press Editing and playing playlists/chaptersPlaylist operations To show other pages/Multiple editingRecording from a video cassette recorder REC REC ModeManual recording Providing a disc with a name Setting the protectionErasing all titles-Erase all titles Erasing all the contents of a disc -Format Disc Press e, r, w, q to select a character and press Enter Changing the unit’s settingsEntering text Show Enter Name screenChanging the unit’s settings Summary of settingsConvenient functions Mpeg DTSShipping Condition Clock Auto Clock Setting Manual Clock Setting Power SaveDefault Settings Quick Start OnPress e, r to select Manual and press Enter TuningManual TV System Child Lock Clock settingsNorsk SpecificationsGlossary ReferenceGlossary Recording Frequently asked questionsOptional Accessories Set upOn the unit’s display Error messagesMaintenance On the televisionTroubleshooting guide Operation Remote control doesn’tPresets Startup is slow Even when g is pressedVoltage Safety precautionsPlacement Foreign matter ServiceMemo RGB Index
Top Page Image Contents