Panasonic PT 52DL52 manual How to connect the PC Input Terminals, Digital PC Input

Installation

How to connect the PC Input Terminals

COMPUTER

INPUT 4

PC INPUT

Conversion adapter (if necessary)

RGB

VIDEO L-AUDIO-R

D-SUB 15P

PC cable (supplied)

K1HA30DA0003 (2 m)

Audio
Connect a cable that matches	2 ⋅ RCA plug
the audio output terminal on the computer.

Signal Names for D-SUB 15P Connector

5 4 3 2 1

10	9		8	7	6
15		14	13	12	11

Pin Layout for PC Input Terminal

Pin No. Signal Name

1R

2G

3B

4GND (Ground)

5GND (Ground)

Pin No.	Signal Name	Pin No.
6	GND (Ground)	11
7	GND (Ground)	12
8	GND (Ground)	13
9	NC (not connected)	14
10	GND (Ground)	15

Signal Name

GND (Ground)

SDA

HD / SYNC

VD

SCL

Notes:

(1)The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible, you will need to make setting changes to the computer at the time of connection.

(2)Some PC models cannot be connected to the set.

(3)There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal.

(4)The computer shown in the illustration is for example purposes only.

(5)Additional equipment and cables shown are not supplied with this set.

(6)The picture will become dark if a PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum picture quality with the projection TV, a vertical scanning frequency of 60 Hz is recommended.

(7)Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.

Digital and analog RGB signals that can be input

The table below lists the different types of digital and analog RGB signals that can be input.						∗
If a signal which differs greatly from any of the types listed below is input, the picture							Mark:
image may not be displayed correctly, or a black background may displayed.						Input signal can be displayed.
Display mode name	No. of dots (H ⋅		V)	Horizontal scanning	Vertical scanning			DIGITAL	PC INPUT
				frequency (kHz)	frequency (Hz)			IN	(Analog)
VGA400	640 ⋅	400		31.5	70.1			∗	∗
VGA480	640 ⋅	480		31.5	59.9			∗	∗
SVGA	800 ⋅	600		37.9	60.3			∗	∗
XGA	1024 ⋅	768		48.4	60.0			∗	∗
MAC16	832 ⋅	624		49.7	74.6				∗
720p	1280 ⋅	720		45.0	60.0			∗

Note:

The number of dots for this set is 800 ⋅ 600 for NORMAL display. Number of dots other than 800 ⋅ 600 in the above data, will be converted to 800 ⋅ 600 (with the exception of MAC 16, which will be displayed in 832 ⋅ 624 dots).

13