Panasonic PT 52DL52 manual Dtv, Dbs, Dvd/Cd, Aux

Operating peripheral equipment using the remote control

Programming The Illuminated Remote Control Using Access Codes

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Determine the manufacturer of the component and look in the table for the code.

1

2

3

Confirm that the external component is plugged in and operating.

Turn the component off.

			CH			Press POWER and ACTION together, for at least 5 seconds.
		C			N
			TI
	+	A		O
POWER					VOL	After 5 seconds, all the illuminated mode keys will begin to flash.
		VOL

CH

Release the POWER and ACTION keys.

4

5

6

	DVD	AUX
VCR		RCVR	Press the mode key.
	DTV	CBL
			The mode key will illuminate steadily, all others will go out.
TV		DBS
1	2	3
4	5	6	Enter the 3-digit component code using the Remote Control numeric keypad.
7	8	9
	0
POWER			Press the Remote Control POWER	to test the component. If the procedure is successful,
			the component will turn on.
		Default Modes For Remote Control
		Device	Operates	Default
		TV	TV (Panasonic Only)	Panasonic TV Codes
		DTV	DTV (Panasonic Only)	Panasonic DTV Codes
		CABLE	CABLE (Preset)	Panasonic CABLE Codes
		DBS	DBS (Preset)	Panasonic DBS Codes
		VCR	VCR (Preset)	Panasonic VCR Codes
		DVD/CD	DVD and CD (Preset)	Panasonic DVD Codes
		AUX	Personal Video Recorders,	Panasonic Personal Video
			Tape and VCR2	Recorders Code
		RCVR	Audio Receiver (Preset)	Panasonic RCVR Code

Helpful Hints: Unsuccessful Code

If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes).

If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the programming will fail.

58