Installation
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
CABLE BOX
ANTENNA
TERMINALS ON
THE LEFT SIDE
OF THE TV
OUTPUT INPUT
TERMINAL ON THE BACK
OF THE CABLE BOX
Connect the cable from the Output terminal on the back of the VCR to
Connect the cable from the Output terminal on the back of the Cable Box to the Antenna input terminal on the back of the VCR.
TO VCR
Connect the cable from the antenna or cable system to the Input terminal on the back of the
CABLE BOX.
Incoming Cable from
VCRAntenna or Cable TV System
the Antenna input terminal on the left side of the TV.
ANT INPUT
OUTPUT
ANT OUTPUT
Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT.
Removing stand cover
Installation Options
Installing on a Wall
•For reasons of performance and safety, installation using the optional
•Keep the Installation Manual and all the removed parts in a safe place for future use.
Installation Option
If you require further information, contact the dealer where you purchased this product.
Example of
Wall
Floor
Installing / Removing the Stand Cover
•The optional
•Once wall mount has been mounted, replace stand cover.
•For detailed TV stand installation/removal steps, refer to the installation manual for the
1. Removing the Stand Cover
Release the lock in the lower center of the stand cover.
Slowly pull the cover downward.
2. Installing the Stand Cover
Insert the 3 upper claws of the stand cover into the mating slots.
Press in the lower center of the stand cover.
9