Basic play
When the menu continues onto another screen
After step 3 on page 40, press SKIP ( 
).
•To return to the previous menu screen Press SKIP ( 
)
•Due to the design of some software titles, SKIP ( 
, 
of the disc concerned.
) may not always work. For operation, refer also to the jacket
Stopping play and returning to the menu screen
Press DVD MENU or TOP MENU.
Play is suspended, and the menu screen is displayed.
•The buttons may not work depending on the disc used.
After operation
When the player is not in use, remove the disc and press POWER to set the player to the standby mode.
What is playback control?
If a Video CD has “playback control” written on its disc or jacket, it means that particular scenes or information can be selected for viewing interactively with the TV monitor using the menu screen.
Note:
•The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. When no further selections are to be played, be sure to press STOP to clear the menu display.
For your reference:
•When 
appears on the screen when a button is pressed, the operation is prohibited by the player or disc.
Stopping play
Press STOP during play.
RESUME function
The player records the point where STOP was pressed during play.
•Press PLAY again, and play will resume from this point.
•When the tray is opened or STOP is pressed again, the RESUME function will be cleared.
This feature remains active if the player is set to the standby mode and then turned back ON.
Notes:
•Cancelling the RESUME function will also clear the chapter review function.
•The chapter review function may not work with some DVDs.
•The DVD/CD disc may feel warm when removed from the player, however, this will not affect the quality or efficiency of the disc.
41