Symmetricom Time Server user manual TimeVault-Generated Messages, Error Messages

5

TimeVault-Generated Messages

5.1Error Messages

5.1.1ERROR 01 VALUE OUT OF RANGE

Meaning:	You have entered a valid command, with an invalid parameter value.
Recovery Action:	Re-enter the command, using a valid parameter.

5.1.2ERROR 02 SYNTAX

Meaning:	You have entered a valid command with a minor syntax error. The
	NET Port network interface software has detected the error.
Recovery Action:	Re-enter the command, using valid syntax.

5.1.3ERROR: Invalid Command

Meaning:	You have entered an invalid command.
Recovery Action:	Consult the manual for the correct command and re-enter.

5.1.4ERROR: Can’t create netdevice <NAME>

Meaning: TimeVault can not create the device needed to map the host to a drive.

Recovery Action: Restart the Unit. If this error message persists, contact Symmetricom Technical Customer Service.

5.1.5ERROR: Can’t set host <NAME> ip <ADDRESS>

Meaning:	You have incorrectly entered a parameter, or there is no room
	currently in the Host table for another IP Address.

Recovery Action: Verify correct parameter values. If correct, restart TimeVault function. If this error message persists, contact Symmetricom Technical Customer Service.

6000-100Ch5.fm Rev. D TimeVault™ User’s Manual 5-87