Symmetricom Time Server user manual IP Address An example of the display is

Front Panel Interface Chapter 2: Installation and Start-Up

Front Panel Network Parameter Display

The following sequence appears on the front panel alphanumeric display when you repeatedly press the SET-UPpush-button. After first power-up, if you enable the Display Security feature, you must enter your user ID and password before these parameters appear on the display.

The values illustrated below are examples only. If you are ready to configure TimeVault for the first time, go now to Section 2.5 “NET Port Network Parameters: First Time Configuration” on page 2-28.

1.IP Address.

An example of the display is:

255.054.000.034

IP ADDRESS

2.Subnet Mask.

An example of the display is:

255.054.000.034

SUBNET MASK

3.Default Gateway.

An example of the display is:

255.054.000.034

DEFAULT GATEWAY

4.DHCP.

An example of the display is:

DHCP Status

OFF

5.Remote Control.

An example of the display is:

Remote Control

Unlocked

6.Display Security.

An example of the display is:

Display Security

OFF

6000-100Ch2.fm Rev. D TimeVault™ User’s Manual 2-25