Symmetricom Time Server user manual 114

Appendix D: SNMP – Simple Network Management Protocol Symmetricom SNMP Enterprise MIB

trapMsgCrossCheckAlarm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only

STATUS current

DESCRIPTION

“This is an ASCII string sent to UDP trap port (162 or user defined) when the TrueTime time server’s detects an offset in time equal to, or greater than, one second from the cross check server and itself and the server is not otherwise in a system alarm condition. The message is ‘Cross Check Status: *****, from ###.###.###.###’. Where **** can be OK or Alarm and

###.###.###.### is the doted decimal notation of the IP address of the unit reporting the change.”

::= { trapMsg 7 }

ntpInPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Total number of NTP packets delivered to the NTP application layer from the transport layer.”

::= { ntp 1 }

ntpOutPkts OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Total number of NTP packets passed from the NTP application layer to the transport layer.”

::= { ntp 2 }

ntpInErrors OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Total number of NTP packets reject for any reason by NTP application layer.”

::= { ntp 3 }

ntpAuthFail OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Total number of authentication failures. This is a subset of ntpInErrors.”

::= { ntp 4 }

D-114 TimeVault™ User’s Manual 6000-100AppD.fm Rev. D