Appendix D: SNMP – Simple Network Management Protocol

Symmetricom SNMP Enterprise MIB

actsGoodCalls OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Number of times the time server called the ACTS dial-up service and successfully received the time.”

::= { acts 7 }

actsBadCalls OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Number of times the time server called the ACTS dial-up service and something was not right. This variable is the sum total of all other ACTS failure types.”

::= { acts 8 }

actsFailedInit OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Time server’s internal modem failed to initialize. If this is excessive, it may indicate a time server hardware failure.” ::= { acts 9 }

actsNoDialTone OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Time server’s internal modem found no dial tone. This may be caused by a broken phone line to the time server.”

::= { acts 10 }

actsNoCarrier OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Time server’s internal modem found no carrier. No modem was

found at the other end and maybe the phone number for ACTS is wrong.” ::= { acts 11 }

actsBusyLine OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS current

DESCRIPTION

“Time server’s internal modem found ACTS line busy.” ::= { acts 12 }

D-122

TimeVault™ User’s Manual

6000-100AppD.fm Rev. D

Page 136
Image 136
Symmetricom Time Server user manual Time server’s internal modem found Acts line busy. = acts