Symmetricom SNMP Enterprise MIB | Appendix D: SNMP – Simple Network Management Protocol |
trapMsgSnmpAuthFail
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP port 162 (or user defined) when
the TrueTime time server determines the SNMP authentication for a SNMP PDU is in correct. The message is ‘SNMP Authentication Failure Trap PDU from: ###.###.###.###’. Where ###.###.###.### is the doted decimal notation of the IP address of the unit attempting the invalid access.”
::= { trapMsg 3 }
trapMsgGpsAntennaFault
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when the TrueTime time server’s GPS detects change of the GPS status. The message is ‘GPS Antenna: *****************, from ###.###.###.###’. Where
***************** is either GPS Antenna OK, GPS Antenna Open or GPS Antenna Short and ###.###.###.### is the doted decimal notation of the IP address
of the unit reporting the change.” ::= { trapMsg 4 }
trapMsgGpsUnlocked
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when the TrueTime time server’s GPS detects change of the GPS status. The message is ‘GPS Status: ********, from ###.###.###.###’. Where ******** is either LOCKED or UNLOCKED and ###.###.###.### is the doted decimal notation of the IP address of the unit reporting the change.”
::= { trapMsg 5 }
trapMsgNewSyncType
STATUS current
DESCRIPTION
“This is an ASCII string sent to UDP trap port (162 or user defined) when the TrueTime time server’s GPS detects change of the GPS status. The message is ‘Time synchronization type is now ****, from ###.###.###.###’.
Where **** can be GPS, ACTS or NTP and ###.###.###.### is the doted decimal notation of the IP address of the unit reporting the change.”
::= { trapMsg 6 }
TimeVault™ User’s Manual |
|
