Symmetricom Time Server user manual Table D-2 Snmp Community Global Parameters, KeyWord Definition

Symmetricom SNMP Configuration Appendix D: SNMP – Simple Network Management Protocol

Table D-2and Table D-3define SNMP configurable parameters that are applied globally to all SNMP communities (this menu appears after the last community menu), and the Symmetricom SNMP factory default settings.

Table D-2: SNMP Community Global Parameters

KeyWord		Definition
SNMP		When set to yes, all authentication failure traps are disabled. This flag overrides the Trap
Global		Enable flag set for each community and directly sets the value of the SNMP variable
Enable Traps		snmpEnableAuthenTraps.0.
		Note: The state of this flag has no effect on the issue of coldstart trap messages.
Return To		This leads back to the main SNMP function window.
Main Menu
Save settings		When SNMP Global Enable Traps is changed, this becomes visible and answering yes
		immediately saves the change to Symmetricom’s SNMP. Answering No negates the
		change.
		Table D-3: Symmetricom SNMP Default Settings
	Key Word		Definition
	Community 1
	Community Name		Public
	Trusted IP Address		0.0.0.0, 0.0.0.0, 0.0.0.0, 0.0.0.0
	Use Trusted IP		No
	R/W Access		read/only
	Trap Enable		No
	Trap Port		162
	Community 2
	Community Name		System
	Trusted IP Address		0.0.0.0, 0.0.0.0, 0.0.0.0, 0.0.0.0
	Use Trusted IP		No
	R/W Access		Normal
	Trap Enable		No
	Trap Port		162
	Community 3 to 5
	Community Name
	Trusted IP Address		0.0.0.0, 0.0.0.0, 0.0.0.0, 0.0.0.0
	Use Trusted IP		No
	R/W Access		read/only
	Trap Enable		No
	Trap Port		162

6000-100AppD.fm Rev. D TimeVault™ User’s Manual D-109