Television Control Panel Buttons
Open the front panel door to gain access to the Television Controls push the door at the point marked with a triangle
Push again to close
STR F
BUTTON | WHAT IT DOES |
.
STR
F
TV/AV
POWER
This button is used to turn the television on and off.
STR (Store)
This button is used to store tuning information and other function settings.
F (Function Select)
The F button is used to select the on screen display functions. Push the button to select the following functions sequentially:
Volume, Contrast, Brightness, Colour, Sharpness, Tint, Bass, Treble, Balance, Tuning and Geomagnetic Correction.
Notes:
Tint: Only displayed when receiving NTSC signals.
Tuning: Not displayed when the TV is showing a DVB station or when in AV mode.
For manual tuning of analogue stations please refer to page 26 or 27. For Geomagnetic Correction instructions please refer to page 32.
This button is used to select the next lower programme number. It is also used with the F button to adjust function settings.
+ / /\
This button is used to select the next higher programme number. It is also used with the F button to adjust function settings.
TV / AV
This button is used to switch between the TV mode and the four AV modes.
Note:
When the television is in
10