Jwin JD-VD903 user manual 2Record Setup, Finalize Setting, Erase Setting

4-2Record Setup

Disc Media Setup (Only works a DVD+R or DVD+RW is loaded)

Finalize Setting

1	Press SETUP in the stop mode.
2	Press / to select “Disc Media” then press		.
3	Press / to select “Finalize” then press	to confirm to excute the function of
4	finalization.
	Select “Confirm” to finalize or “Cancel” to back to the current state.

NOTE:

∀The finalization function only works once in DVD+R disc.

To return to the SETUP MENU screen

Press button.

To finish the setup operation

Press SETUP to exit from SETUP MENU screen.

4 Recording Functions

Erase Setting

1	Press SETUP in the stop mode.
2	Press / to select “Disc Media” then press		.
3	Press / to select “Erase” then press	.
4	Select “Confirm” to erase or “Cancel” to back to the current state.

∀This function only works for DVD+RW.

∀It usually takes 2-3 minutes to clear disc.

NOTE:

∀Please confirm that the DVD+RW is in REC already, as this command may not be paused or cancelled, please recon- sider the necessity of such acts.

∀When Finalization and Erasing begin, all REC functions are locked; please do not turn off the power at this time lest loss of information.

To return to the SETUP MENU screen

Press button.

To finish the setup operation

Press SETUP to exit from SETUP MENU screen.

28