Connecting to an Inside Antenna Setup
-Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.)
|
|
| Turn clockwise to tighten. |
|
|
| Bronze Wire |
| 75Ω Round Cable |
| |
|
|
| Antenna |
| Ω | Flat Wire | Converter |
| 300 |
| |
Apartment Buildings | Wall Connection Jack |
|
|
ANT. IN | AC INPUT |
Antenna Jack
- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, con- nect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outdoor Antenna Setup
- This type of antenna is commonly used in single family dwellings.
UHF
Antenna
Single Family Home
VHF Antenna
Turn clockwise to tighten.
75Ω Round Cable | Bronze Wire |
300Ω Flat Wire |
|
| Antenna Converter |
ANT. IN | AC INPUT |
Antenna Jack
-In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown to the right.
-If signal needs to be split for two TVs, use an antenna signal splitter for connection.
VHF
UHF
Signal
Amplifier
ANT. IN | AC INPUT |
10