LOREX Technology SG19LD800 Series, SG17LD800 Series instruction manual Search Mode, Search By Time

Page 25

Search Mode

Search Mode

Search mode allows you to locate previously recorded video by Date and Time, or by Event Type.

Press the Search Button on the front panel or Remote Control

Enter the User Name and Password (if required).

Use the Left / Right arrows on the Front Panel or Remote Control to switch between the Search By Time and Search By Event screens.

Search By Time

Searches the system based on date and time.

Press the Enter button to access the Calendar (on the left side of the screen)

Navigate within the calendar using the Arrow Keys on the front panel or remote control.

Once the date has been located, press the Enter button to accept the date, and to access the Time Search (on the right side of the screen).

Press and Hold the arrow keys to select the Time (increments of 1 minute). Pressing the button without holding will increment 15 minutes.

Press the Enter button to start the playback. Press the Return button to stop playback and return to the Search By Time screen.

The Date and Time will be displayed at the bottom of the screen. A playback icon will appear indicating that the unit is in Playback mode.

NOTE: The unit will continue to record data while in Playback Mode.

Any days highlighted with GREEN indicate that there is recorded video data.

25

Image 25
Contents LCD Monitor / 8 Channel DVR Combo Page Installation Important SafeguardsService General Precautions General PrecautionsLCD/DVR Combo Features Table of Contents Hard Drive Replacement Appendix #8 Cameras with Getting StartedCAM Front PanelFront Panel Return Button Front Panel Rear Panel Rear Panel Power Button Remote ControlCamera Lens Microphone MC7520 CamerasInstallation Warnings Camera InstallationCamera Stand Installation Connecting Cameras Initial Loading Sequence Display ModesIndividual Camera Display Network Indicators Network Connectivity IndicatorDisplay Modes Single Channel Quad 4 ChannelCovert Camera Mode Zoom ModeCamera Volume Display Mode Camera with Audio Volume AdjustPTZ Control Screen Focus Control Screen PTZ Pan/Tilt/Zoom & Focus ControlsMonitor Display Shutoff System Power OffSystem Shutoff System Shutdown PromptSearch By Time Search ModePlayback and Navigation Controls Search By EventMenu Navigation Controls & Tips Active Option IndicatorMenu Navigation Controls Virtual Keyboard ControlSystem Setup Controls OSD Onscreen Display Display MenuMenu Transparency Sets the Menu Transparency between 0 no Motion Sensor Display Turns MonitorSequence Sequence Setup Mode Screensaver SPOT-OUTMain Display OFF Turns the Main Camera Title Camera MenuPTZ Setup Color SetupContrast, Tint and Color for individual Motion Sensor PTZ PropertiesSelected Area is shaded in Grey Sound Sound MenuBuzzer DATE/TIME System MenuUser Management Controls for System Management System specificDhcp Server i.e. The local Router NetworkMail Setup ADD User Screen User ManagementSystem Information Screen System ManagementFirmware Update Control Device Factory DefaultsSystem Data HDD Event Event / SensorMail Notification Sends and E-Mail Alarm OUT Alarm InputBuzzer OUT Email Notification Format Erases all Hard Drive data Disk ManagementRecording Menu Options Recording Menu ControlsRecording Operations Switching Between Simple and Advanced ModesCamera Specific Settings Navigate Simple Recording ModeContinuous / Motion Setup Advanced Recording ModeContinuous / Motion Parameter Mode Continuous / Motion Schedule Mode Alarm Parameter Mode Alarm Setup ModeNone Alarm Alarm Schedule ModeArchiving Options ArchivingError Messages Network Connectivity Overview Finding Your External IP Address IP & MAC AddressIP Address MAC Address Navigate to http//DDNS.strategicvista.net Setting Up Your Ddns AccountDns1.strategicvista.net User Name Domain Name PasswordRouter Computer Router Port ForwardingInternet Internal Network Ddns Setup Ddns SetupProblem TroubleshootingCheck Image on the Observation System is too dark or too bright Display Specifications Observation System Specifications Appendix #1Audio Specifications Storage SpecificationsRecording Specifications Alarm SpecificationsSystem Specifications Network SpecificationsMC7520 Camera Specifications Appendix #2 Lorex Client Software Requirements Appendix #3 Not Included Connecting a Slave Spot-Out Monitor Appendix #4Installing a Sensor Connecting Motion / Alarm Device Appendix #5Ground Installing a PTZ RS-45 Type PTZ Camera Connecting PTZ Cameras Appendix #6Installing a PTZ RS-232 Type PTZ Camera PTZ Camera Not Included1/4 CCD Cameras Full Connectivity Diagram Appendix #7Setting the New Drive to Master Hard Drive Replacement Appendix #8Connecting the IDE Cable New Hard Drive Format Using the Storage Calculator Appendix #9 Navigating within the System Menu Connecting and Mounting CamerasMenu Navigation Controls Changing the Date and Time Formatting the Hard Drive Camera Setup Main Display OFF Turns the Main Display Screen ON/OFF/TIMED Screen Saver SettingsBacking up your System Configurations Page How do I playback Previously Recorded Data? Appendix #12 Search By Event How do I set the Auto-Recording to OFF? Appendix #13 Setting An Individual Time BlockSetting Multiple Time Blocks Network Setup / Remote Access Overview Setting up Remote Viewing Appendix #14What do you need? Web Finding Your External IP Address System IP & MAC AddressNetwork Setting Up Your Ddns Account User Name Domain Name Password Network Router Port Forwarding System Ddns Setup Adding a Group Lorex NetViewer Software Connection ManagerPassword Camera Assign Set ADD Button Adds Lorex NetViewer Software Remote Connection Cameras Cable Optional AccessoriesIt’s all on the web

SG19LD800 Series, SG17LD800 Series specifications

LOREX Technology has made a significant impact in the surveillance industry with its SG17LD800 and SG19LD800 series, known for offering advanced features, innovative technologies, and exemplary performance. These security cameras are designed to meet diverse surveillance needs, whether for home security, retail monitoring, or industrial applications.

The SG17LD800 series features 8MP resolution, providing crystal-clear, high-definition video that captures fine details even in low-light conditions. The cameras utilize advanced infrared night vision capabilities that allow for visibility up to 130 feet in complete darkness, ensuring 24/7 surveillance continuity. This is particularly important for monitoring perimeters or large outdoor spaces where lighting may be limited.

On the other hand, the SG19LD800 series enhances this with features like superior H.265 compression technology, which reduces the required bandwidth and storage without sacrificing quality. This allows users to store more footage efficiently, making it an economical choice for long-term surveillance needs. Both series come equipped with wireless connectivity options, enabling easy installation and flexibility in camera placement, reducing the hassle of running cables across large areas.

Another noteworthy characteristic of both series is their weather-resistant design, which means they can endure various environmental conditions. This makes them suitable not just for indoor use but also for outdoor installations, where exposure to rain and dust is a concern. The durable housing ensures longevity and reliable performance, offering a solid return on investment for users.

Additionally, LOREX has integrated smart motion detection technology in both series, which allows users to receive real-time alerts when movement is detected. This feature greatly enhances security, as it minimizes the chances of missing critical events. Users can also customize detection zones, reducing false alarms triggered by irrelevant movement, such as passing cars or animals.

Natural user interfaces and mobile compatibility ensure that users can easily access their camera feeds anywhere and anytime. The associated mobile app connects seamlessly with both the SG17LD800 and SG19LD800 series, providing an intuitive platform for monitoring live feeds, reviewing recordings, or adjusting camera settings.

In summary, the LOREX Technology SG17LD800 and SG19LD800 series represent a blend of high-definition video capability, advanced compression methods, robust durability, and smart technologies. These features make them ideal for anyone looking to enhance their security setup with reliable, high-performing surveillance solutions. Whether for commercial or personal use, these series are designed to deliver peace of mind and thorough monitoring in an ever-evolving security landscape.