LOREX Technology SG17LD800 Series, SG19LD800 Series instruction manual Formatting the Hard Drive

Page 82

What are the recommended tips when setting up my system? - Appendix #10

Formatting the Hard Drive

Formatting the hard drive after changing the date, and before beginning the recording of YOUR data is recommended, as the system is set to Automatically start recording when powered on (continuous recording setting).

NOTE: Formatting the Hard Drive will erase any previously recorded data. This will NOT affect your system configurations.

1.Enter MENU mode by pressing the MENU button on the front panel of the system (or on the Remote Control). Select the SYSTEM SETUP Option.

2.Select the DISK MANAGEMENT menu from the MAIN menu. Navigate using the up and down arrows on the front panel (or remote control). Highlight the selection in Green, and press the ENTER button to enter the DISK MANAGEMENT Menu.

3.Navigate to the Format Option, and select the Start button.

•Once OK is selected, the user will be prompted to enter the ADMIN PASSWORD. Once the password is accepted, all Hard Drive data will be erased.

•A warning message will be displayed

with the prompt ‘All Recorded Data will be erased.’

•Select OK to erase the data, or CANCEL to return without erasing the Hard Drive.

Formatting Status Indicator Window: Once the format is complete, the system will return to the Disk Manage Menu.

82

Page 81 Page 83
Image 82
Page 81 Page 83
Contents LCD Monitor / 8 Channel DVR Combo Page Important Safeguards InstallationService General Precautions General PrecautionsLCD/DVR Combo Features Table of Contents Hard Drive Replacement Appendix #8 Getting Started Cameras withFront Panel CAMFront Panel Return Button Front Panel Rear Panel Rear Panel Remote Control Power ButtonMC7520 Cameras Camera Lens MicrophoneInstallation Warnings Camera InstallationCamera Stand Installation Connecting Cameras Initial Loading Sequence Display ModesIndividual Camera Display Display Modes Network Connectivity IndicatorNetwork Indicators Single Channel Quad 4 ChannelCamera Volume Display Mode Zoom ModeCovert Camera Mode Camera with Audio Volume AdjustPTZ Pan/Tilt/Zoom & Focus Controls PTZ Control Screen Focus Control ScreenSystem Shutoff System Power OffMonitor Display Shutoff System Shutdown PromptSearch Mode Search By TimeSearch By Event Playback and Navigation ControlsMenu Navigation Controls Active Option IndicatorMenu Navigation Controls & Tips Virtual Keyboard ControlSystem Setup Controls OSD Onscreen Display Display MenuMenu Transparency Sets the Menu Transparency between 0 no Monitor Motion Sensor Display TurnsSequence Sequence Setup Mode Screensaver SPOT-OUTMain Display OFF Turns the Main Camera Menu Camera TitlePTZ Setup Color SetupContrast, Tint and Color for individual Motion Sensor PTZ PropertiesSelected Area is shaded in Grey Sound Sound MenuBuzzer User Management Controls for System MenuDATE/TIME System Management System specificNetwork Dhcp Server i.e. The local RouterMail Setup User Management ADD User ScreenSystem Management System Information ScreenFirmware Update Control Device Factory DefaultsSystem Data HDD Event Event / SensorMail Notification Sends and E-Mail Alarm Input Alarm OUTBuzzer OUT Email Notification Disk Management Format Erases all Hard Drive dataRecording Menu Controls Recording Menu OptionsSwitching Between Simple and Advanced Modes Recording OperationsSimple Recording Mode Camera Specific Settings NavigateContinuous / Motion Setup Advanced Recording ModeContinuous / Motion Parameter Mode Continuous / Motion Schedule Mode Alarm Setup Mode Alarm Parameter ModeAlarm Schedule Mode None AlarmArchiving Archiving OptionsError Messages Network Connectivity Overview Finding Your External IP Address IP & MAC AddressIP Address MAC Address Setting Up Your Ddns Account Navigate to http//DDNS.strategicvista.netUser Name Domain Name Password Dns1.strategicvista.netRouter Computer Router Port ForwardingInternet Internal Network Ddns Setup Ddns SetupProblem TroubleshootingCheck Image on the Observation System is too dark or too bright Audio Specifications Observation System Specifications Appendix #1Display Specifications Storage SpecificationsAlarm Specifications Recording SpecificationsNetwork Specifications System SpecificationsMC7520 Camera Specifications Appendix #2 Lorex Client Software Requirements Appendix #3 Connecting a Slave Spot-Out Monitor Appendix #4 Not IncludedInstalling a Sensor Connecting Motion / Alarm Device Appendix #5Ground Installing a PTZ RS-232 Type PTZ Camera Connecting PTZ Cameras Appendix #6Installing a PTZ RS-45 Type PTZ Camera PTZ Camera Not IncludedFull Connectivity Diagram Appendix #7 1/4 CCD CamerasSetting the New Drive to Master Hard Drive Replacement Appendix #8Connecting the IDE Cable New Hard Drive Format Using the Storage Calculator Appendix #9 Connecting and Mounting Cameras Navigating within the System MenuMenu Navigation Controls Changing the Date and Time Formatting the Hard Drive Camera Setup Screen Saver Settings Main Display OFF Turns the Main Display Screen ON/OFF/TIMEDBacking up your System Configurations Page How do I playback Previously Recorded Data? Appendix #12 Search By Event Setting An Individual Time Block How do I set the Auto-Recording to OFF? Appendix #13Setting Multiple Time Blocks Network Setup / Remote Access Overview Setting up Remote Viewing Appendix #14What do you need? System IP & MAC Address Web Finding Your External IP AddressNetwork Setting Up Your Ddns Account User Name Domain Name Password Network Router Port Forwarding System Ddns Setup Lorex NetViewer Software Connection Manager Adding a GroupPassword Camera Assign Set ADD Button Adds Lorex NetViewer Software Remote Connection Optional Accessories Cameras CableIt’s all on the web

SG19LD800 Series, SG17LD800 Series specifications

LOREX Technology has made a significant impact in the surveillance industry with its SG17LD800 and SG19LD800 series, known for offering advanced features, innovative technologies, and exemplary performance. These security cameras are designed to meet diverse surveillance needs, whether for home security, retail monitoring, or industrial applications.

The SG17LD800 series features 8MP resolution, providing crystal-clear, high-definition video that captures fine details even in low-light conditions. The cameras utilize advanced infrared night vision capabilities that allow for visibility up to 130 feet in complete darkness, ensuring 24/7 surveillance continuity. This is particularly important for monitoring perimeters or large outdoor spaces where lighting may be limited.

On the other hand, the SG19LD800 series enhances this with features like superior H.265 compression technology, which reduces the required bandwidth and storage without sacrificing quality. This allows users to store more footage efficiently, making it an economical choice for long-term surveillance needs. Both series come equipped with wireless connectivity options, enabling easy installation and flexibility in camera placement, reducing the hassle of running cables across large areas.

Another noteworthy characteristic of both series is their weather-resistant design, which means they can endure various environmental conditions. This makes them suitable not just for indoor use but also for outdoor installations, where exposure to rain and dust is a concern. The durable housing ensures longevity and reliable performance, offering a solid return on investment for users.

Additionally, LOREX has integrated smart motion detection technology in both series, which allows users to receive real-time alerts when movement is detected. This feature greatly enhances security, as it minimizes the chances of missing critical events. Users can also customize detection zones, reducing false alarms triggered by irrelevant movement, such as passing cars or animals.

Natural user interfaces and mobile compatibility ensure that users can easily access their camera feeds anywhere and anytime. The associated mobile app connects seamlessly with both the SG17LD800 and SG19LD800 series, providing an intuitive platform for monitoring live feeds, reviewing recordings, or adjusting camera settings.

In summary, the LOREX Technology SG17LD800 and SG19LD800 series represent a blend of high-definition video capability, advanced compression methods, robust durability, and smart technologies. These features make them ideal for anyone looking to enhance their security setup with reliable, high-performing surveillance solutions. Whether for commercial or personal use, these series are designed to deliver peace of mind and thorough monitoring in an ever-evolving security landscape.
Top Page Image Contents