LOREX Technology DGN216 instruction manual Record Method

Page 16

Record Method

This feature is used to select the DVR record method as either EVENT / NORMAL / OFF.

1.Press ▲ / ▼ to select the desired time camera channel (1-16), then press ENTER.

2.Press ◄ / ► to select the Record Method feature on the screen.

3.Press ▲ / ▼ to select EVENT/ NORMAL/ OFF on the screen.

EVENT: When the alarm input is triggered, the DVR will increase the recording time to that channel.

i.e. the normal record sequence for cameras is Camera 1, Camera 2, Camera 3 etc. In Event mode, when an alarm in triggered from channel 1, the DVR will record using the following sequence: Camera 1, Camera 2, Camera 1, Camera 3, Camera 1, Camera 4 etc.

NORMAL: When an External Audible Alarm is triggered, the DVR will record normally as set up.

OFF: An Alarm Trigger will not cause the DVR to start recording.

4.Press MENU to confirm and exit the Record Method feature.

5.Press MENU again to exit the Camera Setup Option

15

Image 16

Contents Channel Multiplex Digital Video Recorder L3R 4C1 Canada Table of Contents Page Important Safety Instructions Features IntroductionSystem Contents Getting StartedFront Panel Controls Power Back Panel Main Menu Accessing the Main MenuSearch Alarm List Last RecordFull List Motion ListTimer Recording Setup TimerQuality IPS BEST, HIGH, NORMAL, BasicRecord Settings Camera Channel Setup Motion Trigger RecordRecord Method Motion Detection Setup Motion Detection1MOTION Detection Setup 1~16 System Set Up Setting the Internal Audible Alarm BuzzerSetting the External Audible Alarm Device ErrorSystem Time/Date Set up Setting System Time & Date Changing the System PasswordResetting System to Factory Defaults Clearing the Hard Drive DataPage Operation Event Log ViewingNetwork On Screen Display OSDRecording Methods Viewing OptionsAlarm List Video SearchPlaying Back Video Full ListHardware Connection from DVR Static IP Setting Software Installation Static IP SettingPage Connecting the PC and DVR via the Internet Static IPWhat is a Dynamic IP ADDRESS? Dynamic IP SettingSoftware Installation Dynamic IP Setting Connecting the PC to a Router / Router Login LAN endClick TwicePage SVC IP Setting Connect RouterBackup Program Play the last record file Backup ProgramConnect to the DVR via the Internet Address BookSoftware Operation at the Remote Site Control Panel and Basic Operation Video Web Server control panelPlay Back Operation Digital device control panelTurbo 10 11Advanced Settings System Config Account AlarmReboot ApplyFTP MailFile Path Tool BOX Online UserPage Key Lock Troubleshooting Problem SolutionTechnical Specifications TCPIP, ICMP, SMTP, HTTP, FTPCartridge Casing Remove the Cartridge Casing from the DXR216Slide the top Cover over the Cartridge Casing Secure the HDD in the Cartridge CasingLock the Cartridge Appendix 2 Connection Diagram to Cameras and Monitor Appendix 3 Pin Configurations Appendix 4 Rack Mount Installation Appendix 5 Recording Times in Hours Ntsc SystemManufacturer Model Capacity Rotation Appendix 6 Compatible HDD BrandsIt’s all on the web