LOREX Technology DGN216 Setting System Time & Date, Changing the System Password, Jan-01 Mon

Page 21

2.Press ▲ / ▼ to choose a display format. Options are:

Y-M-D= Year - Month - Day M-D-Y= Month - Day - Year D-M-Y= Day - Month - Year

Off = The date and time will not show on the screen.

3.Press MENU to confirm your change.

4.Press ▲ / ▼ to move to another field on the System screen or press MENU to exit this screen and confirm the current operation.

Setting System Time & Date

1.On the System screen, press ▲ / ▼ to select System Time & Date, then press ENTER.

2.Press ▲ / ▼ to choose a number, then press ◄ / ►to move to the next digit:

2003-Jan-01 (Mon) 22:38:29

3.Press MENU to confirm your change.

4.Press ▲ / ▼ to move to another field on the System screen or press MENU to exit this screen and confirm the current operation.

Changing the System Password

1.On the System screen, press ▲ / ▼ to select New Password, then press ENTER.

2.Press ▲ / ▼ to choose a number, then press ◄ / ► to move to the next digit:

3.Press MENU to confirm your change.

4.Press ▲ / ▼ move to another field on the System screen or press MENU to exit this screen and confirm the current operation.

5.If you have completed all your system configuration changes, press MENU again to exit and close menu setup.

Clearing the Hard Drive Data

This option will erase all data from the hard drive.

Ensure that there are no important recordings on the disk before using this option.

1.On the System screen, press ▲ / ▼ to select Clear HDD, and then press ENTER.

2.Press ▲ / ▼ to choose YES to clear the HDD or NO to leave as is.

3.When you choose “Yes” on this option and press ENTER, the DVR will prompt:

4.Press ►to confirm clearing, or ◄ to cancel.

5.Press MENU to confirm your change.

6.Press ▲ / ▼ to move to another field on the System screen or press MENU to exit this screen and confirm the current operation.

All Data in HDD

Will Be Cleared

Are you sure?

(◄ : No ► : Yes )

NOTE: Clearing the data from the Hard Drive results in permanent, irreversible loss of all video and related data currently stored on the Hard Drive.

Resetting System to Factory Defaults

Using the System Reset option will set all options back to factory default settings. Use the steps below to perform this option.

1.On the System screen, press ▲ / ▼ to select System Reset, and then press ENTER.

2.Press ▲ / ▼ to choose:

Yes = Confirm the system reset and load the default settings.

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Channel Multiplex Digital Video Recorder L3R 4C1 Canada Table of Contents Page Important Safety Instructions Introduction FeaturesGetting Started System ContentsFront Panel Controls Power Back Panel Accessing the Main Menu Main MenuSearch Last Record Alarm ListFull List Motion ListTimer Timer Recording SetupQuality IPS BEST, HIGH, NORMAL, BasicRecord Settings Motion Trigger Record Camera Channel SetupRecord Method Motion Detection Motion Detection Setup1MOTION Detection Setup 1~16 Setting the Internal Audible Alarm Buzzer System Set UpSetting the External Audible Alarm Device ErrorSystem Time/Date Set up Changing the System Password Setting System Time & DateResetting System to Factory Defaults Clearing the Hard Drive DataPage Event Log Viewing OperationNetwork On Screen Display OSDViewing Options Recording MethodsVideo Search Alarm ListPlaying Back Video Full ListSoftware Installation Static IP Setting Hardware Connection from DVR Static IP SettingPage Static IP Connecting the PC and DVR via the InternetDynamic IP Setting What is a Dynamic IP ADDRESS?Software Installation Dynamic IP Setting LAN end Connecting the PC to a Router / Router LoginTwice ClickPage SVC Connect Router IP SettingBackup Program Backup Program Play the last record fileConnect to the DVR via the Internet Address BookSoftware Operation at the Remote Site Video Web Server control panel Control Panel and Basic OperationDigital device control panel Play Back OperationTurbo 10 11System Config Account Alarm Advanced SettingsReboot ApplyMail FTPFile Path Online User Tool BOXPage Key Lock Problem Solution TroubleshootingTCPIP, ICMP, SMTP, HTTP, FTP Technical SpecificationsRemove the Cartridge Casing from the DXR216 Cartridge CasingSecure the HDD in the Cartridge Casing Slide the top Cover over the Cartridge CasingLock the Cartridge Appendix 2 Connection Diagram to Cameras and Monitor Appendix 3 Pin Configurations Appendix 4 Rack Mount Installation Ntsc System Appendix 5 Recording Times in HoursAppendix 6 Compatible HDD Brands Manufacturer Model Capacity RotationIt’s all on the web
Top Page Image Contents