LOREX Technology L284161 instruction manual Advanced Menu Set, Password, Default Load Y/N

Page 24

Advanced Menu Set

Advanced Menu Set

You will need to enter the master password (111111) to enter the Advanced Menu settings

1.CHANGE PASSWORD - Allows you to change the password for the DVR. Navigate to this option

using the buttons, and press the button to access the PASSWORD menu:

[ PASSWORD ]

•Current Password - Default Master Password is 111111

•New Password: Enter a new password

•Confirm Password: Confirm the new password

2.PASSWORD ENABLE - Sets the Password to ON/ OFF for Recording. Navigate to this option using

the buttons, and press the button to change the option.

3.DEFAULT SETTING - Resets the DVR to factory defaults. Navigate to this option using the

buttons, and press the button to reset the system to factory defaults. You will be prompted to load defaults:

[ DEFAULT LOAD - Y/N ]

•YES - Press Play

•NO - Press any key

	ADVANCED MENU
.. CHANGE PASSWORD
PASSWORD ENABLE		[ OFF]
.. DEFAULT SETTING
OVERWRITE ENABLE		[ YES ]
MASTER HDD CLEAR
SLAVE HDD CLEAR		[ N/A ]
VIDEO MODE		[ NTSC]
[	]MOVE [ ]SELECT []EXIT

NOTE: If you reset the DVR to Factory Defaults, ALL SETTINGS will be reset except for the DATE and TIME.

4. OVERWRITE ENABLE - Allows for data overwrite on the Hard Drive. Navigate to this option using

the buttons, and press the button to change the option to Y/N.

5. MASTER HDD CLEAR - Clears all data on the Master Hard Drive. Navigate to this option using

the buttons, and press the button to clear all data.

6.SLAVE HDD CLEAR - Clears all data on the Slave Hard Drive. Navigate to this option using the

buttons, and press the button to clear all data. If no Slave drive is present, the N/A message will appear.

7.VIDEO MODE - Sets the video mode to NTSC or PAL.Navigate to this option using the

buttons, and press the button to change.

24

Image 24

Contents Channel Networkable Digital Video Recorder Page Important Safeguards InstallationService General Precautions Lorex Technology IncDVR Features NetViewer SoftwareTable of Contents Troubleshooting Hard Drive not Included Power Supply 12V 5A Remote Control with BatteriesGetting Started Channel Networkable DVRL284161 Front Channel Buttons L284161 Back Remote Control QUAD/ENTER Change toInstalling the Hard Drive Secure the Hard Drive in the Casing Hard DrivePositioning Reinsert the Cartridge Casing into the DVR UnlockedStarting the DVR Self Test Screens System StartHard Drive Detection Starting the DVR Quad Display Indicates Slave Hard DriveMain Menu Control Time / Date Set Date Format Display the Date Format onMenu TIME/DATE Schedule Set Sensor Set Motion SetAlarm Set Alarm 1UURecord Set Only ONE Channel of Audio can be Recorded AT a TimePassword Default Load Y/NAdvanced Menu Set Advanced MenuSystem Information System InformationNetwork Network Recording Functions Menu Settings Recording On screen MessagesSearch Functions Event Search Total Event Master HDD Event noSearch Functions Time Search Playback FunctionsPTZ Pan/Tilt/Zoom Control NetViewer Installation Requirements Minimum System Requirements Operating SystemProcessor MemoryNetwork Connectivity DVR Internet RouterNot Included Router Port Forwarding Network ExampleInternet Router Computer DVRDVR Specifications Appendix #1 Ntsc / PALConnecting Cameras to the DVR Appendix #2 DVR BNC CamerasConnecting a Slave Monitor Appendix #3 DVR Slave MonitorConnecting to an Observation System Appendix #4 Observation System DVRConnecting Alarm Device Appendix #5 DVR SensorTroubleshooting ProblemTroubleshooting It’s all on the web