LOREX Technology L284161 instruction manual Network

Page 27

Network

Network

5.DDNS - The DDNS Value will automatically be completed when GET DDNS is set to YES. To

manually set this value, navigate to this option

using the buttons, and press the button to access the DDNS Submenu. Use the keys to change the values, and

press the key to accept the change.

6.DNS - The DNS Value will automatically be

completed when GET DNS AUTOMATICALLY is set to YES. To manually

set this value, navigate to this option using the buttons, and press the button to access

the DDNS Submenu. Use the

keys

to change the values, and press the

key to

accept the change.

 

7.IP - The IP Value will automatically be completed when DHCP ON is set to YES. To manually set this value, navigate to this option

using the buttons, and press the button to access the DDNS Submenu. Use the keys to change the values, and

press the key to accept the change.

8.GATEWAY - The GATEWAY Value will automatically be completed when DHCP ON is set to YES. To manually set this value,

navigate to this option using the buttons, and press the button to access the DDNS

Submenu. Use the

keys to change

the values, and press the

key to accept the

change.

 

9.SUBNET MASK - The SUBNET MASK Value will automatically be completed when DHCP ON is set to YES. To manually set this value,

navigate to this option using the buttons, and press the button to access the DDNS

Submenu. Use the

keys to change

the values, and press the

key to accept the

change.

 

10.MAC ADDRESS - Displays the MAC ADDRESS of the DVR Unit. This value cannot be changed, as it is hard coded into the Hardware.

11.PRODUCT ID - Displays the PRODUCT ID of the DVR Unit. This value cannot be changed, as it is hard coded into the Hardware.

 

NETWORK

CLIENT ACCESS

[ YES]

DHCP ON

[ YES]

GET DNS AUTO.

[ YES]

GET DDNS IP

[ YES ]

.. DDNS

 

[222.231.024.028]

.. DNS

 

[168.126.063.001]

.. IP

 

[072.168.004.192]

.. GATEWAY

[192.168.000.005 ]

.. SUBNET MASK

[255.255.255.001]

MAC ADDRESS

[##:##:##:##:##:##]

PRODUCT ID

[########-######]

[

]MOVE [

]SELECT [ˆ]EXIT

NOTE: The values provided above are an example of values you MAY see. Your values will likely be different than shown above (based on your specific Network settings)

27

Image 27
Contents Channel Networkable Digital Video Recorder Page Installation Important SafeguardsService Lorex Technology Inc General PrecautionsNetViewer Software DVR FeaturesTable of Contents Troubleshooting Channel Networkable DVR Hard Drive not Included Power Supply 12V 5ARemote Control with Batteries Getting StartedL284161 Front Channel Buttons L284161 Back QUAD/ENTER Change to Remote ControlInstalling the Hard Drive Unlocked Secure the Hard Drive in the CasingHard Drive Positioning Reinsert the Cartridge Casing into the DVRStarting the DVR Self Test Screens System StartHard Drive Detection Indicates Slave Hard Drive Starting the DVR Quad DisplayMain Menu Control Time / Date Set Date Format Display the Date Format onMenu TIME/DATE Schedule Set Motion Set Sensor SetAlarm 1UU Alarm SetOnly ONE Channel of Audio can be Recorded AT a Time Record SetAdvanced Menu PasswordDefault Load Y/N Advanced Menu SetSystem Information System InformationNetwork Network Recording Functions Recording On screen Messages Menu SettingsTotal Event Master HDD Event no Search Functions Event SearchPlayback Functions Search Functions Time SearchPTZ Pan/Tilt/Zoom Control Memory NetViewer Installation RequirementsMinimum System Requirements Operating System ProcessorNetwork Connectivity DVR Internet RouterNot Included DVR Router Port ForwardingNetwork Example Internet Router ComputerNtsc / PAL DVR Specifications Appendix #1DVR BNC Cameras Connecting Cameras to the DVR Appendix #2DVR Slave Monitor Connecting a Slave Monitor Appendix #3Observation System DVR Connecting to an Observation System Appendix #4DVR Sensor Connecting Alarm Device Appendix #5Problem TroubleshootingTroubleshooting It’s all on the web