| Before Operating This Set |
Battery Installation | |
|
|
1 Open the cover. | 2 Batteries: Use two “R6 (AA)” size 3 Replace the cover. |
Apply slight downward pressure | batteries. |
while pulling towards the bottom. | Insert the batteries ensuring the correct |
polarities.
This is identifiable by the “+” and “− ” symbols on the batteries and inside the battery compartment.
Two “R6 (AA)” size
Do not use rechargeable
They are different in shape and performance and may fail to ensure correct operation.
Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the batteries to burst.
Old Batteries | New Batteries |
Replace both batteries at the same time. | Don't mix diffrent battery types. | Don't Recharge. |
| (alkaline with carbon zinc, etc.) |
|
7