Panasonic TX-47P600HZ instruction manual Press to store the Colour System

Page 24

Sound System Condition.

Tuning Channels

Sound System Selection (Different region use differing systems)

This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme Number, and is not applicable in AV mode .

1

Press to select the “SOUND SYS”.

Press until the optimum sound is obtained.

The sound system will change as shown.

4.5MHz 5.5MHz

6.5MHz 6.0MHz

TUNING MENU
SYS SELECT	AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS	5. 5 MHz
COLOUR SYS	AUTO
FINE TUNE
SKIP	OFF

Note:

These are different sound broadcast transmission systems applicable to differing countries.

2 STR

Press to store the Sound System.

TV/AV

Press to exit from the “SOUND SYS”.

This returns the set to the normal viewing condition.

Colour System Selection (Different region use differing systems)

If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.

1

Press to select the “COLOUR SYS”.

Press to produce the optimum image.

The colour system will change as shown.

AUTO PAL SECAM

NTSC3.58 NTSC4.43

TUNING MENU
SYS SELECT	AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS	5. 5 MHz
COLOUR SYS	AUTO
FINE TUNE
SKIP	OFF

Colour System Condition.

Note:

PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment.

2 STR

Press to store the Colour System.

TV/AV

Press to exit from the “COLOUR SYS”.

This returns the set to the normal viewing condition.

24

Image 24

Contents Operating Instructions Dear Panasonic Customer Tablele off contentst ts Is removed Turn the power Off before Safety Precaution Securing the casters Connecting the Plug to the Wall OutletHow to Turn the Power On Before Operating This SetBattery Installation Battery cautionsBefore Operating This Set Location of Controls Controls and Terminals on the TVFunction Refer to STRConnecting the Aerial Cable to the RF In Terminal Connecting HeadphonesConnections How to connect the AV1, 2, 3 or 4 Input Terminals ConnectionsConnect VCRs and other peripheral equipment How to connect the DVD Input Terminals DVD PlayerGeneral Operation General Operation On-Screen menu Display from Remote Control On-Screen menu Display from Remote Control Convergence Adjustment Convergence Adjustment modeSelect Access Return TV / AV Exit LanguageConvergence1 Adjustment for RED, Blue and Green Convergence AdjustmentConvergence2 Adjustment for RED and Blue Tuning Channels SYS SelectAuto Tune Manual Tune Colour SYS AutoTuning Channels Automatic TuneHelpful Hint Manual Tune Manual TuneFine Tuning How to Cancel the Fine TuningHow to Cancel the Skip Function Programme Number SkipColour SYS Auto Fine Tune Skip Press to store the Colour System Setup Adjustment Press to go back to watching TVPicture Adjustment Picture Adjustment Picture Auto Scan ModeHelpful Hint N Normalization Sound Adjustment Surround OFF MenuMenu Soft Sound Adjustment Surround on Surround OFFSurround Aspect Controls 43ZOOMS-ZOOMAspect Controls AutoJust ZoomPress the Blue button to exit from the PIP mode Multi ScreenMulti PIP Press the Red button Press the Yellow buttonTeletext TOP OFF Timer Channel SearchStrobe Multi ScreenTV / Teletext mode List / TOP modeVCR / Game OFF Text Select List TOPSelection FulI / Top / BottomReveal List StoreTeletext News Flash Update Sub Coded Page AccessIndex Advanced Remoto Control Operation Stereo Bilingual Sound SelectionVCR / LD / DVD Control Manufacturer setting Advanced Remoto Control OperationTroubleshooting Symptoms ChecksSound ChecksCleaning Page Page Specifications Receiving SystemCustomer’s Record