Panasonic TX-47P600HZ instruction manual Convergence Adjustment mode, Language

Page 16

Convergence Adjustment

Convergence Adjustment mode

1

Prior to adjustment, tune the broadcast signal to the video input signal and operate the set for more than 60 minutes. If the location or direction of the set is changed or moved, the display may be out of alignment.

If necessary, carry out the following procedures once with PAL signal and again with the NTSC signal.

Vertical centre marker

Horizontal centre marker

SET UP

2

3

Press to display the Setup Menu.

Press to select the “CONVERGENCE”.

Press to access to the “CONVERGENCE” menu.

Press to select the “CONVERGENCE1” or the “CONVERGENCE2”.

Press to access to the function.

SETUP MENU
CHILD LOCK	OFF
PICTURE SHIFT	OFF
TUNING MENU
CONVERGENCE	ACCESS
LANGUAGE	ENGLISH

SELECT

ACCESS

RETURN TV / AV - EXIT

CONVERGENCE	1	ACCESS
CONVERGENCE	2

Example: CONVERGENCE1 is selected.

16

Image 16

Contents Operating Instructions Dear Panasonic Customer Tablele off contentst ts Is removed Turn the power Off before Safety Precaution Securing the casters Connecting the Plug to the Wall OutletHow to Turn the Power On Before Operating This SetBattery cautions Battery InstallationBefore Operating This Set Location of Controls Controls and Terminals on the TVFunction Refer to STRConnecting Headphones Connecting the Aerial Cable to the RF In TerminalConnections Connections How to connect the AV1, 2, 3 or 4 Input TerminalsConnect VCRs and other peripheral equipment How to connect the DVD Input Terminals DVD PlayerGeneral Operation General Operation On-Screen menu Display from Remote Control On-Screen menu Display from Remote Control Convergence Adjustment Convergence Adjustment modeSelect Access Return TV / AV Exit LanguageConvergence1 Adjustment for RED, Blue and Green Convergence AdjustmentConvergence2 Adjustment for RED and Blue Tuning Channels SYS SelectAuto Tune Manual Tune Colour SYS AutoAutomatic Tune Tuning ChannelsHelpful Hint Manual Tune Manual TuneFine Tuning How to Cancel the Fine TuningProgramme Number Skip How to Cancel the Skip FunctionColour SYS Auto Fine Tune Skip Press to store the Colour System Setup Adjustment Press to go back to watching TVPicture Adjustment Picture Auto Scan Mode Picture AdjustmentHelpful Hint N Normalization Surround OFF Menu Sound AdjustmentMenu Soft Surround on Surround OFF Sound AdjustmentSurround Aspect Controls 43ZOOMS-ZOOMAspect Controls AutoJust ZoomPress the Blue button to exit from the PIP mode Multi ScreenMulti PIP Press the Red button Press the Yellow buttonTeletext TOP OFF Timer Channel SearchStrobe Multi ScreenTV / Teletext mode List / TOP modeVCR / Game OFF Text Select List TOPSelection FulI / Top / BottomReveal List StoreSub Coded Page Access Teletext News Flash UpdateIndex Stereo Bilingual Sound Selection Advanced Remoto Control OperationVCR / LD / DVD Control Manufacturer setting Advanced Remoto Control OperationTroubleshooting Symptoms ChecksSound ChecksCleaning Page Page Specifications Receiving SystemCustomer’s Record