Kompernass KH 6516, KH 6515 manual Connecting the DVD Player to a television

8. Connecting the DVD Player to a television

After setting up the DVD player, you can now connect it to a television. The DVD player can be connected to a television that operates with the PAL, NTSC and SECAM standards.

If you want to use the DVD player on a television with the NTSC standard you must change the video setting in the DVD players "OSD menu". There PAL is set as the television standard at the factory.

On this topic see also chapter 10.3. "Video settings: Setting the TV standard".

Depending on the features of the television, there are various options for connecting the DVD player to it:

8.1 Connecting to a television via ScartCable/RGB

Note:

Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection. Select this connection variation in the case of televisions equipped with an RGB input. If you are not sure if the television is equipped with an RGB input then you can check this by consulting the television's instruction manual.

8.2 Connecting to a television via S-Video

Note:

For this type of connection the television must have available an S-Video input and two audio "IN" cinch sockets. If you are not sure if the television is equipped with S Video and/or cinch sockets you can check this by consulting the television's instruction manual.

For this connection variant you will need:

•an audio cinch cable (not supplied)

•an S-video cable (not supplied) These can be obtained from your dealer.

In order to connect the DVD player to a television via S-video

•Connect the jack inscribed with EURO SCART to a television Scart socket by using the supplied Scart cable.

•For playback select the matching channel on your television Check with the television's instruction manual on how you can set the AV channel.

•In the OSD menu select the menu Video/Video Out/RGB.

On this topic see also chapter 10.3 "Video settings: Video output".

•Connect the jack inscribed with S-VIDEOto a television S-Video socket using an S-video cable.

•Insert the white audio cinch cable plug into the cinch socket inscribed L on the rear panel of the DVD player.

•Then insert the white plug at the other end of the audio cinch cable into the left channel audio socket on the television.

•Insert the red audio cinch cable plug into the cinch socket inscribed "R" on the rear panel of the DVD player.

•Then insert the red plug at the other end of the audio cinch cable into the right channel audio socket on the television.

•For playback select the matching channel on your television Check with the television's instruction manual on how you can set the AV channel.

•In the OSD menu select from the menu Video/Video Out/RGB.

On this topic see also chapter 10.3 "Video settings: Video output".

- 7 -