Panasonic PV 27D53 DST Daylight Saving Time, Manual Clock Set, Reset all unit Memory Functions

*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again.

POWER

ACTION

SELECT

SET

STOP

STOP

POWER

DST (Daylight Saving Time)

Unit auto adjusts clock for DST (Daylight Saving Time.)

■Spring (First Sunday in April)

DST: ON ➞ Sets clock ahead one hour.

■Autumn (Last Sunday in October)

DST: OFF ➞ Turns clock back one hour.

•If your area does not observe Daylight Saving Time, select DST : OFF (see “Clock” on pages 12 and 13).

Note to CABLE system installer:

This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Manual Clock Set

If AUTO CLOCK SET was incomplete, manually				Initial
set the clock as follows.
1	SET CLOCK	Press ACTION on		Setup
		CLOCK Menu
		the remote to
	DST : ON	display SET
SELE CT MONTH		screen.
SELECT :
SET	: SET
END	: ACT I ON
2		Press	to
		select the month
	THU
		and press SET to

set. In the same manner, select and set the date, year, time, and DST (Daylight Saving Time).

Press ACTION twice to start CLOCK and

3 exit.

Reset all unit Memory Functions

When moving unit to a new location, or if a mistake was made in the Initial Setup section.

1 Turn the unit Power on.

2 Press and hold both PLAY and on the unit for more than 5 seconds.

• The power will shut off.

3 Perform “Initial Setup” on page 10.

11