CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER (for DVD)
If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround for- mat, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi- ence with powerful and
Use audio coaxial digital cables (commercially available) for the audio connections.
Center
speaker
Front speaker (left)
Dolby Digital or DTS decoder
Surround
speaker (left)
NOTES:
1
Front speaker | ANT. |
(right) | AUDIO OUT DIGITAL OUT |
| R L COAXIAL |
To COAXIAL DIGITAL | To DIGITAL AUDIO OUT | |
(PCM/BITSTREAM) | ||
AUDIO INPUT jack | COAXIAL jack | |
Surround | Subwoofer |
|
speaker |
|
|
(right) |
|
|
[Fig. 11]
•Be sure to turn off the power to all components in the system before connecting another component.
•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
•If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
•Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
•When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
– 14 – | EN |