PLAYING A DISC
PLAYING A DVD VIDEO
OR AN AUDIO CD
DVD 
CD
Getting started
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.)
1Press the POWER button.
¡The power will turn on.
2Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct recess, with the label side up.
4Press the PLAY button.
¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.
¡When you play back the DVD which a title menu is recorded, the menu may appear on the screen. In this case, refer to “USING THE TITLE MENU”.
5Press the STOP button to stop play.
Notes
¡When the DVD mode has been switched to the TV mode, the DVD mode shut down first and then TV picture and sound appears in about 4 seconds. Similarly, when the POWER button is pressed off in the DVD mode, this mode shut down first and then the set’s power is turned off.
¡A “prohibited icon” may appear at the
¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.
¡With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.
USING THE DVD MENUS
DVD
Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.
1Press the DISC MENU button.
¡The DVD menu will appear.
2Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.
3Playback will start from the selected title.
– 21 – | EN |