CONNECTIONS (CONTINUED)
CONNECTING THE UNIT TO A HOME THEATRE SYSTEM
1.Front Left Speaker
2.Television
3.Center
4.
5.Front Right Speaker
Place the subwoofer, front, rear and center speakers in locations as shown/described here. After correctly positioning the speakers, perform the Tone Test on the AV Amplifier and adjust the volume controls until the desired sound is achieved. For best results, sit in the viewing position and have someone adjust the volumes for you; this will enable you to set the optimal levels.
NOTE: To avoid scratching the furniture, place felt pads to the bottom of each speaker.
NOTE:
•The rear speakers can also be located on the side wall facing the viewing position and each other. Make sure the viewing position is located between the two speakers in this case. Experiment to find optimal position.
6.Viewing/Listening
7.Rear Left Speaker
8.Rear Right Speaker
9.AV Amplifier w/Dolby Digital Decoder/DTS Decoder
NOTES:
•You must change your external TV’s INPUT selection to VIDEO IN or AUX IN, if using an external TV. If the TV has a remote control, press the INPUT or AUX button on the remote to change the input selection.
•When connecting the unit, refer to the owner’s manuals of the external TV and receiver/home stereo, as well as this manual.
•W hen connecting the unit, make sure the power is off and all units are unplugged before making any connections.
15