Emerson EWC19DA Operations, Watching a TV Program, Selecting the Sleep Timer, Closed Caption

Page 16
SLEEP 10

OPERATIONS

WATCHING A TV PROGRAM

1

Select the desired channel with the CH(annel) K or

Lbutton.

2

Adjust the volume to the desired listening level using the VOL(ume) K or L button.

3

Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

Note: Suppose that the TV/DVD is shut off or in any

other mode than TV. Press the CHANNEL K or L button on the TV/DVD, and the TV/DVD will be in the TV mode to watch television.

SELECTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

1

Press the SLEEP button on the remote control.

2

You may change the sleep time with pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10

minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be dis- played on the screen when you press the SLEEP but- ton on remote control.)

To cancel the sleep timer:

Press the SLEEP button repeatedly until "SLEEP 0" is displayed.

NOTES:

•When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

•When the TV mode is changed to the DVD mode, the sleep time will be lost.

CLOSED CAPTION

This TV can receive C1 and C2 of Caption and Text.

CAPTION MODE

1)Characters can be displayed on the TV screen when the received broadcast signal contains the Caption Signals.

2)Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in mem- ory, it is displayed all at once.

Roll-up mode: Displays the characters continuous- ly by scrolling (max. 4 lines)

NOTE: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will not be displayed.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7 lines)

2)If the received broadcast signal does not contain the caption or text signal, no change will occur.

NOTES:

1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.

2)Captions and texts may not match the TV voice exactly.

3)Interference may cause the closed caption system not to function properly.

4)The caption or text characters will not be displayed while the menu display or function’s display is shown.

5)If you see this screen!!

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF].

- 16 -

EN

1B17

Page 15 Page 17
Image 16
Page 15 Page 17
Contents EWC19DA Important Safeguards S2 8 9 8 a Precautions Laser SafetyImportant Copyright Information RADIO-TV InterferenceLocation Avoid the Hazards Electrical Shock and FireTable of Contents Features Supplied AccessoriesRemote Control Fig Operating Controls and FunctionsRear View Fig Preparation for USE ANTENNA/CABLE ConnectionsVHF/UHF Combined Antenna VHF/UHF Separate AntennasCable Without Converter Descrambler BOX Cable with Converter Descrambler BOX or Satellite BOXInstalling the Batteries Connecting to External Input JacksConnecting to a Stereo System for DVD Connecting to AN Amplifier Equipped with DigitalConnecting to a Dolby Digital Decoder Or DTS Decoder for DVDSET UP for USE Channel PresettingLanguage Selection ADD/DELETE FunctionSelecting the Sleep Timer OperationsWatching a TV Program Closed CaptionPicture Adjustment Closed Caption SelectionChip SET UP Mpaa Rating SET UPTV Rating SET UP Selection Rating Category ExplanationsWhen you select TV-Y7 When you select TV-PG, TV-14 or TV-MASymbols Used in this Manual About the DiscsPlayable Discs Disc TypesUsing the DVD Menus Playing a DiscPlaying a DVD Video Or AN Audio CD DVD CDUsing the Title Menu Pausing Playback or Displaying a Still PictureResuming Playback from Point Where Playback Stopped Stepping Through FramesFast FORWARD/REVERSE Slow MotionStarting from a Desired Track Starting from a Desired Time CountProgram setting menu screen will appear Playing from a Desired Title or ChapterRepeat Program playback is not available during random playbackYou can define a section to be played back repeatedly Starting point a will thenBe selected Selected section will beSettings Changing the Audio Language or Sound ModeChanging the Subtitle Language Changing the Camera Angle Multi-Angle PicturesChanging the ON-SCREEN Display Dolby Digital 5.1 Channel is displayed as Dolby Digital 6CHLanguage Settings Changing the Setup ItemsSetup screen appears Video Settings Audio SettingsParental Lock Password settingsCan then change the control level Other Settings Control LevelsLanguage Code List Troubleshooting Guide Problem Corrective ActionClosed Caption Problem Possible Remedy Normal time available for editing the captionsSymptom Cause Remedy TV/DVDMaintenance Cabinet CleaningDisc Handling ServicingSpecifications General SpecificationsElectrical Specifications Other SpecificationsControles DE Operación Y SUS Funciones Conexión a Tomas DE Entrada Reproducción DE UN Disco Utilización DE LOS Menús DE DVD Memo Duration Limits and ExclusionsTel 0EMN01833
Top Page Image Contents