Grundig New York 32 CLE 9130 SL manual Tuning analogue television channels­, English ­73

Tuning analogue television channels­

This setting is only necessary if you cannot re- ceive any digital channels and you have not car- ried out an analogue search during initial setup. The television channels can be set directly or using the scan.

Switching the television to ­analogue reception

Note:

7Analogue channels can be selected if the option »Air« or »Cable« has been selected.

1 Open the »Select input source« menu with »«.

2Depending on the antenna system, select the option »Air« or »Cable« with »V«, »Λ«, »<« or »>« as the input source and press »OK« to confirm.

Note:

7Additional operations are explained in the following sections.

Setting all analogue television channels

Analogue channels are displayed in the channel list after the digital channels.

Note:

7Plug the rooftop antenna cable (for analogue television channels) into the »ANT IN« socket on the television.

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line »Source« with »V« or »Λ« and press »OK« to confirm.

Select the option »Air« or »Cable« with »<«, »>«, »V« or »Λ« and press »OK« to con- firm.

4Select the line »Automatic Channel Search« with »V« or »Λ« and press »OK« to con- firm.

5Select the line »Scan Typ« with »V« or »Λ« and set the option »ATV« with »<« or »>«.

6Start the scan with »« (red).

Note:

7After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«.

–All channel and favourites lists for the ana- logue channels will be deleted and com- piled anew.

–The »Results« menu appears, and the scan for TV channels begins. Depending on the number of television channels received, this can easily take a few minutes.

–The search is complete as soon as the »PRO- GRAM TABLE« appears.

Note:

7You can abort the search by pressing »MENU«.

7Press »MENU« to end the setting.