Grundig New York 32 CLE 9130 SL manual Sound settings

Sound settings

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to confirm.

– The »SOUND SETTINGS« menu appears.

Note:

7Additional operations are explained in the following sections.

Automatic volume

Television stations broadcast at different vol- umes. The automatic volume limiting (AVL) func- tion means the volume is kept the same when you switch between channels.

1Select the line »AVL« with »V« or »Λ« and select the option »On« with »<« or »>«.

Note:

7If the »SRS TS HD« setting has been selected in the »Audio Mode« line, the AVL line cannot be selected.

Stereo/two channel sound, mono

If the device receives two-channel-sound pro- grammes, e.g. a film with the original soundtrack on audio channel B (display: »Dual II«) and the dubbed version on sound channel A (dis- play: »Dual I«), you can select the audio channel you prefer.

If the device receives stereo or Nicam pro- grammes, it switches automatically to stereo sound (display: »Stereo«).

You can switch the sound to »Mono« if the stereo sound quality is poor.

1Select the line »Audio Type« with »V« or »Λ« and adjust the setting with »<« or »>«.

Volume

1Select the line »Volume« with »V« or »Λ« and change the setting with »<« or »>«.

Balance

1Select the line »Balance« with »V« or »Λ« and change the setting with »<« or »>«.

Stereo width

This broadens the sound output for stereo pro- grammes and improves the sound with mono reception.

1Select the line »Audio Mode« with »V« or »Λ«.

2Select the option »Spatial« with »<« or »>«.