Special
Searching for television chan- nels from the cable provider automatically
1Open the menu with »MENU«.
2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.
– The »SOURCE SETUP« menu appears.
3 Select | the line | »Source« | with | »V« |
or »Λ« and press »OK« to confirm. | »>«, | |||
Select | the option | »Cable« with | »<«, | |
»V« or »Λ« and press »OK« to confirm.
4Select the line »Automatic Channel Search« with »V« or »Λ« and press »OK« to confirm.
– The menu appears.
20.09.2010
SOURCE SETUP15:46
AUTOMATIC CHANNEL SEARCH
Connection Type | Cabel |
Country | U.K. |
Scan Type | ATV & DTV |
Cable Scan Type | Quick |
Frequency (MHz) | Auto |
Network ID | Auto |
Exit
Back
Start Search
5Select the line »Scan Typ« with »V« or »Λ« and set the option »DTV« with »<« or »>«.
6Select the line »Cable Scan Type« with »V« or »Λ« and set the option »Quick« or »Full« with »<« or »>«.
–The search function »Quick« sets the channels according to the information provided by your cable provide in the transmission signal.
–If the option »Full« is selected, the entire fre- quency range will be scanned. The search can take a long time with this option. This option is recommended if your cable provider does not support the search type »Quick«.
Note:
7You can accelerate the search. To do this, you need information about the frequency and network ID. You are usually able to get this data from your cable operator or find it in forums on the Internet. For example, the frequency 402MHz and network ID 61441 can be entered for Germany.
7Start the scan with »« (red).
–All channel and favourites lists will be
deleted and compiled anew.
Note:
7After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«.
–The »Results« menu appears, and the scan for TV channels begins. Depending on the number of television channels received, this can easily take a few minutes.
–The scan is complete as soon as the »PRO- GRAM TABLE« appears.
Note:
7You can abort the search by pressing »MENU«.
8Press »MENU« to end the setting.