Grundig 32 VLC 6121 C manual Technical data

Page 57

INFORMATION----------------------------------------------------------------------------------------------------------------------

GRUNDIG 32 VLC 6121 C

Technical data

Operating voltage: 220–240 V,~, 50–60 Hz

Power consumption: On mode 83 W Standby < 0,50 W

Energy Efficiency class:

C

Maximum power consumption Operational 145 W

Annual power consumption 121 kWh

Audio output:

2 x 20 W music power output

2 x 10 W Sine wave power

Rohs Limits: Pb (Lead)/Hg (Mercury) Pb meets ROHS directive / 56 mg

Peak luminance ratio: % 65

Digital reception ranges Cable:

Overall band: 110 MHz – 862 MHz

Modulation: 16QAM, 32QAM, 64QAM, 128QAM and 256QAM

Symbol rate: 4.0 Msym/s to 7.0 Msym/s

Terrestrial:

VHF/UHF band, Bandwidth 7 MHz and 8 MHz

COFDM modi: 2k and 8k

Constellation: 16QAM, 64QAM, QPSK

Terrestrial (DVB-T2):

VHF/UHF band, Bandwidth 7 MHz and 8 MHz

FFT Size: 1k, 2k, 4k, 8k, 16k, 32k

Modulation: 16QAM, 64QAM, 256QAM, QPSK

Guard Interval: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128

As this feature is optional, it is not available in all products.

Analogue reception ranges:

C02 ... C80, special channels S01 ... S41

Preset channels:

TV/Radio 1000 (Cable – DVB-C) or 100 (Analogue)

1000 (Terrestrial – DVB-T) or

100(Analogue)

8 AV, 1 USB

Screen (dm²):

28dm²

Screen size:

80cm/32 inch

Maximum resolution:

WUXGA, 1920 x 1080

Weight:

approx. 12 kg

Dimensions:

W H D 79,5 cm 54,5 cm 8,1 cm

Technical changes and errors reserved.

ENGLISH 57

Image 57

Contents LCD TV Settings Setup and Safety General informationConnection and preparation OverviewOperation with a Common Interface Special settings4 English English 5 General information Special features of your television setImportant notes on environmental protection Receiving digital channelsConnecting the antenna and power cord Plug the power cord into a wall socketConnection and preparation Open the battery compartment by removing the lid Inserting batteries into the remote controlCompartment Close the battery compartment. Note Environmental noteOptic Out Connections on the television setAudio Pb Pr Y/AV2Controls on the television set Navigation in the menus Remote control Main functionsRemote control All functions Selecting language, country and operating mode Initial set-up and tuning television channelsVarious settings HelpTuning television channels from the cable provider DVB-C Tuning terrestrial television channels DVB-TSelect the line »Active Antenna Power« with »V« or »Λ« Start the scan with »« greenSelecting channel lists Changing the program table for the digital channels» FAV« Creating lists of favouritesSorting channels in the favourite list Deleting channelsPicture settings Setting on the right sideAs from DVB-T receivers or DVD players Sound settings Soundeffects Exiting the settingSRS TruSurround HD EqualizerBasic functions Zoom function Eco modeZapping function Electronic TV guideChanging the picture format Possible limitations when using an external data medium Information on recording and playing television programmesGrundig has no influence on these restrictions Connecting external data media Settings for USB recordingSelecting the menu Testing the external data medium Switching on automatic previewSafely remove disk Selecting external data mediaRecording programmes ″Pausing time shift programmesOne-touch programme recording MediumUsing the electronic TV guide Presetting programmes to be recordedRecording a programme from the channel list Open the »CHANNEL LIST« with »OK«Editing recording data in the timer menu Deleting recording data in the timer menuBy manual data entry Deleting programmes in the recording list PlaybackVideo data File formatsAudio data Image dataConnecting external data media Selecting the display mode Settings in the USB setup menuSetting the display duration for pictures in a slideshow File browserDivX VOD Basic playback functionsSelecting chapters on DivX files Additional playback functionsSelecting titles on DivX files Playing selected titlesSelecting a certain passage for playback Selecting a track or picture in steps SkipFast forward Rotating picturesAdditional functions TOP text or Flof text modeLanguage settings Opening the Settings menuTimer settings Setting the date and timeParental control settings Updating software Restoring the television to the default settingsConvenience functions Changing the PIN code Locking television channelsDigi Link functions on your television Device operation Switching the device to standbyHigh definition HD ready Connection options Connecting external devices With an analogue TV signal HeadphonesConnecting the headphones Changing the headphone volumeSetting the audio format Connecting the hi-fi system/ AV receiverPlaying the audio signal via the HiFi system Hi-fi system/AV receiverSelecting presets for the PC Connecting a PCSettings for PC mode Options »Auto Ajust« for automatic PC configura- tionAccess control for CI module and smart card What is a Common Interface?Inserting the CA module Common Interface CI is an interface for DVB receivers» V« Select Line »Source«Select Option » «English 51 Searching for digital terrestrial TV channels automaticallySearching for digital terrestrial TV channels manually Automatic service updateSetting all analogue television channels Tuning analogue television channelsTo select the preferred setting Changing stored analogue channelsSelecting a channel list Selection is still possible using the number buttons Exiting the settingsEntering channel names 8 digit maximum Skipping television channelsService information for retailers Displaying signal informationEnvironmental note For digital channels only Open the menu with »MENU«Technical data Problem Possible cause Remedy Troubleshooting