Displaying signal information
(for digital channels only)
1Open the menu with »MENU«.
2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.
3Select the line »Signal Information« with »V« or »Λ« and press »OK« to confirm.
–Information on the channel, network, modulation, symbol rate, quality and signal strength is displayed.
Notes:
7The signal information changes in accord ance with the current input source.
7The signal properties are displayed in the lower section of the menu. The further the bars for »Quality« and »Signal Strenght« extend to the right, the better the reception signal.
7The signal level not only depends on your receiver system, but also on the channel which is currently active. Remember this when aligning your antenna based upon the signal level display.
4Press »MENU« to close the menu.
Service information for retailers
Only operate the television with the power supply/power
cord provided.
The product complies with the following EU directives:
2006/95/EC directive on electrical equipment for use within certain voltage limits. 2004/108/EC directive on electromagnetic compatibility.
2009/125/EC directive on ecodesign require- ments for
Power consumption values and classes are speci- fied according to the regulations 2009/642 and 2010/1062 and the standards EN62087 and EN62301 as per European Union framework di- rectives 2009/125/EC and 2010/30/EU
Environmental note
This product has been made
from
materials which can be
and recycled.
Therefore, do not dispose of the product along with normal household waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Dispose of the used device at a collec- tion point for electrical and electronic equipment. The symbol on the product, in the operating man- ual or on the packaging indicates that recycling is possible.
Information on collection points is available from your local authorities.
Help protect the environment by recycling used products.
56 ENGLISH