Grundig 32 VLD 4201 BF manual Entering channel names 8 digit maximum, Exiting the settings

Special settings----------------------------------------------------------------------------------------------------------

Entering channel names (8 digit maximum)

1In the »PROGRAME TABLE« menu, select the

television­ channel with »V «, »Λ«, »<« or »>« and press »« (red) to confirm.

2Open the input keyboard with »« (green).

Note:

7If necessary, delete the current channel

name. To do this, select the »« button with »<« or »>« and delete repeatedly using »OK«.

3Select the required letters or numbers with »V«, »Λ«, »<« or »>« and confirm with »OK«.

Repeat the entry for further letters/numbers.

Note:

7Use the »ABC« button to switch to upper case letters and use the »?@123« button to switch to symbols and numbers.

4Save the channel name by using »V«, »Λ«, »<« or »>« to select »Submit« and confirm with »OK«.

Note:

7If you wish to enter other channel names, repeat steps 1 to 4.

Creating lists of favourites

You can select your favourite channels and save them in up to four favourites lists (Fav 1 to Fav 4).

1In the »PROGRAME TABLE« menu, switch over to the list view with »« (yellow).

2Select the preferred channel with »V« or »Λ«.

3Use »<« or »>« to ”push“ the channel into one of the favourites lists 1 to 4 and press »OK« to confirm.

–The position in the favourites list is marked with »✔«.

–You can enter the same channel in more than one favourite list.

–Each favourite list can store up to 255 chan- nels.

Note:

7Channels can also be deleted from favour- ites lists. Select the channel to be deleted with »V«, »Λ«, »<« or »>« and delete it with »OK«.

Exiting the settings

1Press »MENU« to end the setting.

Skipping television channels

You can highlight television channels to be skipped when you select with »Λ« or »V«.

Selection­ is still possible using the number ­buttons.

1In the »PROGRAME TABLE« menu, switch over to the list view with »« (yellow).

2Select the preferred channel with »V« or »Λ«.

3Select the column »Skip« with »<« or »>« and use »OK« to mark the channel.

– The channel is marked using »✔«.

Note:

7Channels can also be reactivated. Select the channel with »V« or »Λ«, then select the column »Skip« and reactivate the channel with »OK«.

­48 ENGLISH