Grundig 32 VLD 8130 SL manual Connecting a PC, Selecting presets for the PC, Settings for PC mode

OPERATION AS A PC MONITOR----------------------------------------------------------

Connecting a PC

1Connect the »PC-IN« socket on the television to the corresponding socket on the PC using a VGA cable (video signal).

2Connect the »Audio« socket on the televi- sion to the corresponding socket on the PC using a suitable cable (audio signal).

Note:

7Adjust your PC to the monitor (for example, picture resolution 1280 x 768, picture fre- quency 60 Hz).

Selecting presets for the PC

1Press » « and use »V«, »Λ«, »<« or »>« to select the preset »PC« and press »OK« to confirm.

Settings for PC mode

1Open the menu with »MENU«.

2Select the »SOURCE SETUP« menu item with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the function or setting with »V« or »Λ«, and then use »V«, »Λ« or »<«, »>« to implement it.

	20.09.2010
SOURCE SETUP	15:46
Source	PC
Auto Ajust
Extended settings
Auto Ajust Mode	On

Position50H - 50V

Size0

Phase30

Exit

Back

Options:

–»Auto Ajust« for automatic PC configura- tion.

–»Auto Ajust Mode«, select the option »On« if the configuration should be imple- mented automatically in PC mode.

–»Position« to configure the horizontal and vertical picture position.

–»Size« to set the cycle frequency.

–»Phase« to eliminate flicker, unfocused pictures or horizontal interference.

4Press »MENU« to end the setting.

­64 ENGLISH