FUNAI V7PFDVD20 Marker Setup, Use Cursor K/L repeatedly until marker search menu appears

Marker Setup

This feature allows you to assign a specific point on a disc to be called back later.

To set a marker

1 During playback, press [MODE] repeatedly until “” / “” appears.

e.g.) DVD

/12 (SEARCH)

2 Use [Cursor K/L] repeatedly until marker search menu appears.

or

To return to the marker later

1 To select a desired marker, repeat steps 1 to 3 in “To set a marker“.

e.g.) DVD

2 Press [ENTER] at the desired marker to start playback from the specific point which you set.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV

3 Use [Cursor s / B] to select an available marker within 60 seconds.

or

4 When the playback reaches the point at which you want to set a marker, press [ENTER].

• Marker is now set.

5 Press [RETURN ] to exit.

Note:

•Marker search menu will disappear in about 60 seconds when there is no input.

•You can mark up to 10 points.

•To clear a marker, select the marker to be cleared, and then press [CLEAR].

•Ejecting the disc or turning off the power will erase all mark- ers.

•Selecting “” at step 3 in the section “To set a marker” will also erase all markers.

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION

31

EN