FUNAI 6513DA Operations, Watching a TV Program, Closed Caption, Selecting the Sleep Timer

WATCHING A TV PROGRAM

1

Select the desired channel with the CH(annel) K or

Lbutton.

2

Adjust the volume to the desired listening level using the VOL(ume) K or L button.

3

Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

CLOSED CAPTION

This TV can receive C1 and C2 of Caption and Text.

CAPTION MODE

1)Characters can be displayed on the TV screen when the received broadcast signal contains the Caption Signals.

2)Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in mem- ory, it is displayed all at once.

Roll-up mode: Displays the characters continuous- ly by scrolling (max. 4 lines)

NOTE: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters will not be displayed.

SELECTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

1

Press the SLEEP button on the remote control.

2

You may change the sleep time with pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10

minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be dis- played on the screen when you press the SLEEP but- ton on remote control.)

To cancel the sleep timer:

Press the SLEEP button repeatedly until "SLEEP 0" is displayed.

NOTES:

•When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

•When the TV mode is changed to the DVD mode, the sleep time will be lost.

TEXT MODE

1)Displays the text on the screen by scrolling (max. 7 lines)

2)If the received broadcast signal does not contain the caption or text signal, no change will occur.

NOTES:

1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.

2)Captions and texts may not match the TV voice exactly.

3)Interference may cause the closed caption system not to function properly.

4)The caption or text characters will not be displayed while the menu display or function’s display is shown.

5)If you see this screen!!

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF].