FUNAI 6513DA owner manual Settings, Changing the Audio Language or Sound Mode

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

DVD CD

The TV/DVD has a function which allows you to select the desired audio language and sound mode.

For DVDs

Press the AUDIO button during playback, and then press the K/L buttons to select the desired audio language.

•The audio language can be changed if multiple lan- guages are recorded on the DVD being played.

AUDIO 1 : E N G / 8

AUDIO 2 : F R E / 8

AUDIO 8 : J P N / 8

NOTES:

•Pressing the K/L buttons may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc.

•If a desired language is not shown after pressing the K/L buttons several times, the disc does not have an audio source in that language.

•The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that lan- guage is not available on a disc, a language defined by the disc is selected.

•The screen display will disappear after about 15 seconds.

•If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed.

AUDIO S T E R E O

Both right and left channels

are active (stereo).

Only the right channel is active.

Only the left channel is active.