FUNAI 6513DA Changing the Subtitle Language, Changing the Camera Angle Multi-Angle Pictures

CHANGING THE SUBTITLE

LANGUAGE

DVD

The TV/DVD has a function which allows you to select the desired language for subtitles.

Press the SUBTITLE button during playback, and then press the K/L buttons to select the desired subtitle language.

•The subtitle language can be changed if the subti- tles are recorded in multiple languages on the DVD being played.

•The subtitle language cannot be changed if the sub- titles are recorded in a single language on the DVD being played.

CHANGING THE CAMERA ANGLE (Multi-Angle Pictures)

DVD

The TV/DVD has a function which allows you to select the desired camera angle.

1Press the ANGLE button during playback.

•If the disc contains sequences recorded from differ-

ent camera angles, the angle icon ( ) will appear at the bottom-right of the screen. You can change the camera angle when the icon appears on the screen.

•The camera angle cannot be changed if the disc does not contain sequences recorded from different camera angles.

2Press the K/L buttons while the angle num- ber is shown on the screen.

•Pressing the K/L buttons cycles the subtitle lan- guage from SUBTITLE 1, SUBTITLE 2 and all the languages recorded through to OFF.

NOTES:

•Some discs allow subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

•If the desired language is not shown after pressing the K/L buttons several times, the disc does not have subtitles in that language.

•The subtitle language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected.

•It may take time to display the subtitles in the selected language.

•The screen display will disappear after about 15 seconds.

NOTE:

•The screen display will disappear after about 15 seconds.