Operation
Channel menu
This TV set has two methods to set channels, which are respectively Scan Channel, Add Channel.
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.
Note
Make sure you are in an open environment where there is a good signal while scanning so that it is able to find all channels more easily.
Scan Channel
-Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the All Channel List.
Note : the Channel menu will be only operated in normal TV mode.
1Press the MENU button and then use 
/ 
button to select the
Channels menu.
2Press the 
button and then use 
/ 
button to select Scan Channel.
3Press the 
button and then use 
/ 
button to Select Cable or
Antenna mode.
4Press the OK button to start searching channel.
While it is scanning for channels, at any point, you can interrupt the scanning process by pressing the Stop Scan button. Those channels have been scanned would be stored in the available channel table.
5After you finish scanning for available channels, you may select DONE to return the display window..
When Antenna is selected, the TV will detect antenna signals and will search for antenna TV (NTSC and ATSC) channels available in your local area.
When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC, ATSC, QAM modulated) channels available in your area.
Add Channel
If excessive channel signals of unwanted programs are received in local area, manual search function is recommended.
1Press the MENU button and then use 
/ 
button to select the Channels menu.
2Press the 
button and then use 
/ 
button to select Add Channel.
3Press the 
button and then use digital buttons to input channel number
you want to add channel.
4Press the OK button to confirm.
5When you are satisfied with your choice, press MENU button to return to the previous menu.
6Press EXIT button to return to TV viewing or press 
/ MENU button to return to the previous menu.
Note
Make sure your TV is placed in an open environment where is a good signal while scanning so that it is able to find all channels more easily.
If user does not proceed scan channel in advance, it will take Antenna as the default source.
16