Operation
Operation
Switching On/Off the TV set
1.First, connect power cord correctly.
2.Select the viewing source by using INPUT button on the remote control.
3.When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
4. If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Note:
If the TV in power on , the screen show information according the type of input signal . the information will disappear. If there is no signal, the No signal will display on the left bottom of the screen.
Choose the Menu Language
When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
1Press the MENU button and then use 
/ 
button to select the
Settings menu.
2Press the 
button and then use 
/ 
button to select Menu
Language.
3Press the 
button and then use 
/ 
button to enter the list of
available language. English 
Spanish or French
4Select your language with the 
/ 
button and press the OK
button to confirm you selection.
5When you are satisfied with your choice, press the EXIT button to return to normal viewing or press 
/ MENU button to return to the previous menu.
Choose the Input Source
-Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
1. Press MENU button and then use 
/ 
button to select the Video menu.
2Press the 
button and then use 
/ 
button to select Select Source option.
3Press the 
button and then use 
/ 
button to select the available Source.
TV, 
4. Press the OK button to confirm.
5When you are satisfied with your choice, press the EXIT button to return to normal viewing or press 
/ MENU button to return to the previous menu.
You can also press the INPUT button repeatedly to select the desired source.
Owner 
s Manual 15