AM/PM Setting, Basic Operation | Interquartz IQ750 manual

TIMER

FIGURE 1C AM/PM SETTING

7.If 12-hour mode was selected above, the display will show “1-AM 2-PM”

8.Press 1 or 2 to select AM or PM time display

TIMER

FIGURE 1D TIME SETTING

9.The display will show “TIME-HHMM” after completion of the Hour Mode Setting

10.To set the current time enter 2 digits for the hour, followed by two digits for the minutes

11.The display will show “CLOCK STORED” and the date and time will be updated.

Note: use Cursor or to correct your numeric entries stage in the above procedure.

BASIC OPERATION

IQ750 can be used in the same way as a normal telephone; simply lift the Handset to answer an incoming call, or lift the Handset and dial on the Keypad to commence an outgoing call. Please refer to other sections for more about Handsfree, Headset, Caller ID display and Memory operations. The telephone will also operate in a basic mode when mains power has failed and if batteries have not been fitted (the telephone will automatically power up approximately 1 second after lifting handset). If 4 x AA alkaline batteries (not supplied) are fitted in the absence of mains adaptor or during mains power failure, they can provide up to one month's support of all functions.

10

Image 10

Interquartz IQ750 manual AM/PM Setting, Basic Operation

Contents

Caller ID Handsfree Headset Business Telephone Model IQ750 Contents Memory Operation Illustrations Headset Savvy Features FeaturesCaller ID CLI Features General Functions Liquid Crystal Display Operating RequirementsMessage Waiting Display Brightness Adjustment Setting UPGeneral SETTING-UP Unpacking Date and Time SET UP Display Date Setting AM/PM Setting Basic Operation General Controls and Indicators TOP View Ringer Volume Switch RINGER/MESSAGE Waiting IndicatorRinger Pitch Control Volume Slider Reset KEYCradle Switch ALPHA-NUMERIC Keypad Redial KEY Mute KEY and IndicatorPause Function To use Handsfree mode HANDSFREE/HEADSET KEY and IndicatorTimer KEY and Automatic Call Timer Function To use Headset mode Battery Compartment Display Icons and Fields Number Field Name Field Handsfree Operation Incoming calls using HandsfreeOutgoing calls using Handsfree manual or memory dialing Changing from Handsfree to Handset during a call Hints for Handsfree Operation Headset Operation TRAINEE/SUPERVISOR ModeHEADSET/HANDSET/HANDSFREE Modes Alert Light Support Silent Ringing Memory Operation Direct Access Memory KeysMemory Backup Memory Storage Speed-Dialling Storable Handsfree code Direct Access Memory CapacityTo store a Number and Name in a Direct Access memory Speed-Dialling and Automatic Hang-up To dial from a Direct Access Memory Direct Access Memories and the Memory Protection Switch Memory Protection Switch To dial from a Protected Direct Access Memory Directory Memory Capacity Directory MemoryTo Store a Number and Name into a Directory Memory To edit an entry in the Directory Memory To dial from the Directory Memory using Name SearchLast Number Redial Memory To delete an entry from Directory Memory Using the 5-Stack Last Number Redial Memory Using the Caller ID Display Call Waiting Display Caller List Display of a Typical Call from the Caller List Page Page Advanced Network Operation Manually Resetting the Message Waiting PromptsTalking Text SMS Messages Automatic Trunk Access Digit Insertion Pause Function When Dialing OUTAutomatic Pause Insertion Pause Time Speed Dialing Using the MemoriesHolding and Transferring Calls Cascade Memory Dialing Location InstallationWall Mounting IQ235 Wall Mount Bracket Modular Wall Jack and Link Cord IQ235 Wall Mount Bracket BREAK-OFF Lugs Headset MIC Adjust Control Message Waiting Light Compatibility To Make a Headset MIC Level Adjustment Headset Polarity Switch Headset MIC Adjust Control and Polarity SwitchPage Cleaning General Care and MaintenanceFailure to Operate and Service Difficulties Warranty 6 Years Thunderstorms Service and Product Services International Quartz Limited