5. HEADSET OPERATION
The IQ750 can be configured to suit many different headsets - please consult the INSTALLATION section for details to get the best performance from your headset.
BASIC OPERATION
To make or receive call using the Headset:
1.Press HANDSFREE/HEADSET
2.If you are making an outgoing call, dial the required number
3.To revert from Headset mode to Handsfree mode during a call from Headset mode, unplug the Headset
4.Speak as necessary
5.To hang up, press HANDSFREE/HEADSET
HEADSET/HANDSET/HANDSFREE MODES
A call can be switched between modes as follows:
1.To revert to Handset mode from Headset mode, lift Handset
2.To revert back to Headset mode during Handset mode, press
HANDSFREE/HEADSET.
TRAINEE/SUPERVISOR MODE
Allows the Handset and Headset to be used in tandem. This will enable a supervisor to monitor a trainee’s progress during a call, or “take over” a call. The following procedures assume that the trainee is wearing the Headset and a call is in progress.
1.During a trainee’s call the supervisor may lift the Handset (Handsfree/Headset indicator will turn off)
2.Quickly press HANDSFREE/HEADSET and the indicator will illuminate
3.The trainee may continue the conversation with the supervisor only listening to the call.
20
