Interquartz IQ750 manual Redial KEY, Pause Function, Mute KEY and Indicator

REDIAL KEY

Press to redial the last number last dialed, which may be up to 32 digits long. When pressed while still on-line, the telephone will clear the call and retry the number. It can be used in Handset, Handsfree, and Headset modes. Dialing more than 32 digits during one call will cause erasure of the entire number from the Redial Memory.

See further details of the 5-stack Last Number Redial Memory in section 6 “Memory Operation”.

To redial last number

1.Lift Handset, or press HANDSFREE/HEADSET

2.Press REDIAL (telephone redials last number).

To direct redial the last number

1.Lift Handset, or press HANDSFREE/HEADSET

2.Dial a number, [unsuccessful]

3.Press REDIAL; the telephone will automatically clear and re-connect the line; the number will be re-dialed.

PAUSE FUNCTION

The Pause command may be needed if your phone is connected to certain types of PABX or to any network where a momentary pause is required (e.g. between internal and external dial tones).

For manual dialing:

1.Lift Handset

2.Dial any digits required before the pause

3.Press PAUSE; the telephone will complete the dialing process once the Pause time has elapsed

4.Dial the remaining digits.

The Pause function can be stored in any Direct Access or Direct Memories. See section 8 for further details.

MUTE KEY AND INDICATOR

When pressed, it cuts off transmission from the Handset, Headset and Handsfree microphones to allow user privacy. The red light indicates when the mute condition is

active. Press MUTE again to release the mute condition. 14